Welcome, Guest. Please login or register.
November 21, 2024, 07:31:15 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  WMS Reel Games. (Moderator: knagl)
| | |-+  Power supply replacement question Williams 40S5 Jackpot Party		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Power supply replacement question Williams 40S5 Jackpot Party  (Read 11857 times)
vintageamusement
Guest
« on: October 09, 2010, 03:13:02 PM »
Hi all,

I've got a Jackpot Party, was working, but now it only lights up and the dotmation works, but thats it. The LEDs for +12, -12 and the +5 are not lit. These would be the 3 middle LEDs, the 1st and 5th LEDs are lit.  I'm assuming the power supply should be replaced based on several posts saying these are a common failure. I did not actually check voltages coming out of the PS as I did not have any literature telling me what voltages were... I read the brilliant ATX replacement procedure from cfh. I can probably do it, but my soldering and crimping skills are not good. I would really prefer an exact plug and play replacement. Is there one available, if so where is the best place to buy it? And am I just being stupid to not put in an ATX despite my lack of enthusiam about doing it?

Thanks for your help!
Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #1 on: October 09, 2010, 04:19:24 PM »
You can send out your power supply for repair.
Check this web page.
http://www.adrianelectronics.com/

Adrian has done good repair work for me in the past and he has a flat rate of $35.00 for the power supplies.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
cruisepl
PGFD (Ret.)
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 33
Offline Offline

Gender: Male
Posts: 296
« Reply #2 on: October 09, 2010, 04:57:06 PM »
Quote from: Neonkiss on October 09, 2010, 04:19:24 PM
You can send out your power supply for repair.
Check this web page.
http://www.adrianelectronics.com/

Adrian has done good repair work for me in the past and he has a flat rate of $35.00 for the power supplies.


Adrian just repaired a dotmation power supply for me. Three days turnaround and he sent an email to confirm I was happy with the repair. Definitely would recommend Adrian
Logged
Someone has to be stupid enough to run into a burning building when everyone else is running out !!
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #3 on: October 10, 2010, 07:29:41 AM »
Welcome to  nlg, vintageamusement!

The only problem with the repaired power supply is that it's going to die again down the road.  If you do the ATX mod, even if it dies (would take a lot longer than the stock WMS power supply) it would then be a plug-and-play replacement to throw another ATX supply in there.  Food for thought.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
vintageamusement
Guest
« Reply #4 on: October 10, 2010, 02:34:37 PM »
Thanks for the quick and informative replies, very helpful.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #5 on: October 10, 2010, 04:25:47 PM »
This is the upper power supply. Same part as OEM  http://powersupplydepot.com/pssearch.asp?searchtype1=4&search1=17095&action=Search 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #6 on: October 10, 2010, 04:29:39 PM »
Yes, but not the same as the lower power supply.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #7 on: October 10, 2010, 04:41:48 PM »
Quote from: cruisepl on October 09, 2010, 04:57:06 PM

Adrian just repaired a dotmation power supply for me. Three days turnaround and he sent an email to confirm I was happy with the repair. Definitely would recommend Adrian

Neon  I did say "upper"   I posted this mainly because  cruisepl  said he had a upper PS repaired.  Now I ask you which is better, have a old one repaired or get a brand new one for 20 bucks.
« Last Edit: October 10, 2010, 06:18:24 PM by StatFreak » Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
cruisepl
PGFD (Ret.)
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 33
Offline Offline

Gender: Male
Posts: 296
« Reply #8 on: October 10, 2010, 06:10:21 PM »
Quote from: Buzz on October 10, 2010, 04:41:48 PM
Quote from: cruisepl on October 09, 2010, 04:57:06 PM

Adrian just repaired a dotmation power supply for me. Three days turnaround and he sent an email to confirm I was happy with the repair. Definitely would recommend Adrian

Neon  I did say "upper"   I posted this mainly because  cruisepl  said he had a upper PS repaired.  Now I ask you which is better, have a old one repaired or get a brand new one for 20 bucks.

Sorry guys a bit of confusion here.  I had a lower power supply repaired from one of my dotmation machines not a top box "dotmation power supply" .  I should have been a bit more clear in my post. Again sorry for the confusion
« Last Edit: October 10, 2010, 06:18:44 PM by StatFreak » Logged
Someone has to be stupid enough to run into a burning building when everyone else is running out !!
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #9 on: October 10, 2010, 06:19:42 PM »
Don't mind me.

The quotes were getting all messed up so I fixed them. wave

Stat garfield
nlg  Global Moderator
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #10 on: October 10, 2010, 10:23:10 PM »
Quote from: Buzz on October 10, 2010, 04:41:48 PM

 Now I ask you which is better, have a old one repaired or get a brand new one for 20 bucks.

Only A or B to choose from???  Scratch Head Scratch Head
I want to pick C
Have the CORRECT one repaired...... Nerd


Only Kidding you Buzz.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #11 on: October 11, 2010, 12:57:45 AM »
I haveto take buzzes side the origonal power supply is right at the limit for amperage it is better to use an atx and modify machine
Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #12 on: October 11, 2010, 08:39:44 AM »
Quote from: paul on October 11, 2010, 12:57:45 AM
I haveto take buzzes side the origonal power supply is right at the limit for amperage it is better to use an atx and modify machine

I agree Paul.
But for someone without soldering and or wire splicing ability, I was offering a suitable work around.
As the original poster suggested.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #13 on: October 11, 2010, 12:07:34 PM »
I understand the easiest fix for him would be to get the origonal power supply fixed and for that price is very reasonable I guess there are a lot of people who want everything origonal the way it was made also. If you saw the first power supply I changed out you would want to know what monkey did this
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #14 on: October 11, 2010, 03:28:28 PM »
Quote from: Buzz on October 10, 2010, 04:25:47 PM
This is the upper power supply. Same part as OEM  http://powersupplydepot.com/pssearch.asp?searchtype1=4&search1=17095&action=Search 

Quote from: Buzz on October 10, 2010, 04:41:48 PM
Quote from: cruisepl on October 09, 2010, 04:57:06 PM

Adrian just repaired a dotmation power supply for me. Three days turnaround and he sent an email to confirm I was happy with the repair. Definitely would recommend Adrian


Neon  I did say "upper"   I posted this mainly because  cruisepl  said he had a upper PS repaired.  Now I ask you which is better, have a old one repaired or get a brand new one for 20 bucks.


For those who haven't clicked on this link, it's a brand new OEM upper Wms dot power supply for $20. Buzz was suggesting that a brand new OEM for $20 is better than a rebuilt one.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
vintageamusement
Guest
« Reply #15 on: October 13, 2010, 12:48:37 PM »
Hi,

So I assume there is no brand new lower power supply that is a plug and play solution? Only the ATX units which require modifying the connections right?  Thanks again for all the replies, great group you have here with knowledgeable people.
Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #16 on: October 13, 2010, 01:19:16 PM »
I think there are some companys that sell the power supply board for williams I cant remember if its Mouser or Digy Key or another but they are out there but expensive
Logged
blueridgeslots
703 730-0821
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1262
Offline Offline

Gender: Male
Posts: 1779


703 730-0821


WWW
« Reply #17 on: October 13, 2010, 04:14:20 PM »
Quote from: vintageamusement on October 13, 2010, 12:48:37 PM
Hi,

So I assume there is no brand new lower power supply that is a plug and play solution? Only the ATX units which require modifying the connections right?  Thanks again for all the replies, great group you have here with knowledgeable people.



Sure there is, factory WMS ones, we have a few left from old stock, yes cost is up there, Happ is getting over $150 we have some left for $95, there is no direct aftermarket plug in one for the lower game without altering the harness, but there are plenty that will do it if you want to besides the ATX supply and still fit in the same box so nowbody knows
Logged
Selling Quality Tested and Guaranteed Slot Parts and Machines at Wholesale

http://stores.ebay.com/BLUE-RIDGE-SLOT-SERVICE
superparts
**************** SLOT PARTS FOR SALE ****************
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 33
« Reply #18 on: November 17, 2011, 04:04:40 AM »
I have some BB2 PS's if you are interested.
Logged
i have parts for:

 Atronic Emotion:
Comm, backplane, Main, Multi media boards and button decks.

WMS BB N BB2
NXT2 & NXT CPUs, BB2 backplane, OLED decks.

Aristocrat Veridian
CPU, Backplane, powersupply.
PM Or EMAIL preferably:  superparts1@gmail.com
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #19 on: November 21, 2011, 08:18:47 PM »
Quote from: superparts on November 17, 2011, 04:04:40 AM
I have some BB2 PS's if you are interested.

This thread is over a year old, and the original poster was working on a WMS 40S5 Dotmation reel machine.  propeller
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
superparts
**************** SLOT PARTS FOR SALE ****************
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 33
« Reply #20 on: November 21, 2011, 09:26:30 PM »
My apologies. 
Logged
i have parts for:

 Atronic Emotion:
Comm, backplane, Main, Multi media boards and button decks.

WMS BB N BB2
NXT2 & NXT CPUs, BB2 backplane, OLED decks.

Aristocrat Veridian
CPU, Backplane, powersupply.
PM Or EMAIL preferably:  superparts1@gmail.com
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #21 on: November 21, 2011, 10:34:41 PM »
Quote from: superparts on November 21, 2011, 09:26:30 PM
My apologies. 

No worries.  yes
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.113 seconds with 20 queries.