Welcome, Guest. Please login or register.
November 22, 2024, 05:40:06 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  How to hook up an S2000 topbox player-tracking plate GEN II printer?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: How to hook up an S2000 topbox player-tracking plate GEN II printer?  (Read 10930 times)
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« on: October 22, 2010, 02:51:23 PM »
I just went through all 525  S2000 threads....yes...Five Hundred & Twenty-Five Threads!  no
There's not one post on how the Molex's coming out of the back of the printer
get connected to in the topbox for a topbox-style printer...not one!  bawling hissy fit bawling

Can someone point me to the correct post or snap a few pictures
of the wires coming pot of a topbox printer?  Help
All I know at the moment is that it's a GENII printer?
Thanks in advance for you help on this. Hail

I know where the Netplex Molex goes. ( up into the Netplex distribution board...! )
but I don't know what or where the 4-pin Molex and 3-pin Molex coming
out of the black-colored coiled cord goes to?
The 3-pin Molex looks like a power plug really.
I will take some pics of these three Molex's when I get home later tonight.  propeller

This is what my topbox printer looks like below.
I have no idea where the picture came from so please don't sue me for using it...  knockout>>>

* s2000 printer2.JPG (14.83 KB, 221x166 - viewed 609 times.)
« Last Edit: October 23, 2010, 01:33:40 AM by stayouttadabunker » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #1 on: October 22, 2010, 05:30:26 PM »
Bunker   All I can tell you is a Future Logic printer, the 3 pin molex is not used. ( I should say, on a S 2000 it's not used )   Scratch Head Scratch Head Wonder if I can find a place to plug it in my machines will start paying off better.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #2 on: October 22, 2010, 06:17:39 PM »
Thanks buzz...I'll keychip it and see if there's anything in the options settings I'm missing... applause
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #3 on: October 22, 2010, 06:23:31 PM »
Printer on or off, I don't think you have to key it to find out if it is or isn't. ( test button )    Will have to key it to turn it on.  ( I think )  Scratch Head Scratch Head
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #4 on: October 22, 2010, 07:27:57 PM »
Mark,

I have never seen a gen-ii in a S2K, so you have peaked my curiosity! I have only seen a gen-ii in an AVP machine. They have a front mount and a side mount. I am sure you can bunkerize it! May the force be with you! bust gut laughing

Mark  Me, too! CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #5 on: October 22, 2010, 10:15:26 PM »
Stout

Here is the harness for printer
I doubt that Future logic changed pin assignment at the printer. so it should work.

I would just get 2 10 molex connectors and make a single cable.
That is what I did for the older future logic printer..
* PRINTER, EZ PAY, UPRIGHT VISION, WIRING DIAGRAM.pdf (92.83 KB - downloaded 294 times.)
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: October 22, 2010, 11:48:57 PM »
It works guys! It's sweet too!
Just for kicks, I left the reel glass printer in to see what would happen.
So, I went into the I/O printer tests in the options and hit the button to "advance" the paper.
You know what happened?

BOTH printers fed out ticket paper simultaneously! lolololo  rotflmao
So, I shut the door and and threw in a $20 to see if they would print...
now I get an error saying "We're sorry. The printer is presently out of order...
would you like some coins instead?" lololo!!!??!!


I pulled the Molex Netplex plug out of the reel printer and shut the door and hit the Cash out button..
Now I got all three options..."Coins, Ticket, or 100 Coins"
I love setting that to a hundred coins split pay because I like playing 100 coins to see how
many credits I can get on a machine.
Then my wife plays 100 coins and we compare tickets.
If my ticket is higher - she does the dishes! lol

So, what did we learn tonight?
Well, for starters....they're both the same Netplex beasts.
The machine will only print with one printer....lol
And yes, the GENII is one sweet Netplex printer!
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #7 on: October 22, 2010, 11:53:50 PM »
Mark,

Great JOB!!! Clap Clap Clap Now I need to get some of those printers to play with!!! Anybody have them??? PM me if you do!

Regards,

Mark CaptainHappy (The CaptainHappy one, that is!) Crazy

P.S. You are going to  Please Post Pictures of how you wired it?
Logged
  Come sail away, Come sail away Come sail away with me..
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #8 on: October 22, 2010, 11:58:12 PM »
Okay give me a couple of minutes...
I gotta get my camera out. stir the pot / get cooking

AW! My camera broke (  Angel-Devil )...anyways

It looks like all you have to do is stick the Netplex Molex from the printer
(The other Molexes are NOT needed! )
into any available spot on the Netplex Distribution board,
key-chip the MPU, get into the option settings, enable the printer
and your good to go!  yes
« Last Edit: October 23, 2010, 10:52:10 AM by stayouttadabunker » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #9 on: October 23, 2010, 12:02:40 AM »
Skipper   I can fix you up with 10 Brand New ( still in the box ) FutureLogic PSA-66ST   They don't fit anything I have. Damn Ebay.   hissy fit hissy fit hissy fit bawling bawling bawling
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #10 on: October 23, 2010, 04:42:40 PM »
Quote from: Buzz on October 23, 2010, 12:02:40 AM
Skipper   I can fix you up with 10 Brand New ( still in the box ) FutureLogic PSA-66ST   They don't fit anything I have. Damn Ebay.   hissy fit hissy fit hissy fit bawling bawling bawling

Buzz,

Use a sharpie marker and add an "N" to the part number and pretend they are Netplex... Then you can pretend that they are more valuable!  Crazy

Would be nice if there were some easy way to convert them??

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #11 on: October 23, 2010, 08:18:20 PM »
What's the "ST" for?  Scratch Head 3 Scratch Head 2
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #12 on: October 23, 2010, 08:51:08 PM »
Quote from: stayouttadabunker on October 23, 2010, 08:18:20 PM
What's the "ST" for?  Scratch Head 3 Scratch Head 2

According to the manual:      PSA-66ST (RS232 Interface)
                                       PSA-66-001N (Netflex Interface)

Ron (r273)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #13 on: October 23, 2010, 08:52:17 PM »
Quote from: r273 on October 23, 2010, 08:51:08 PM
Quote from: stayouttadabunker on October 23, 2010, 08:18:20 PM
What's the "ST" for?  Scratch Head 3 Scratch Head 2

According to the manual:      PSA-66ST (RS232 Interface)
                                       PSA-66-001N (Netflex Interface)

Ron (r273)


Good stuff r273!!!  applause Hail
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #14 on: October 23, 2010, 11:31:51 PM »
Okay, here's a dumb question. Is there an adapter to go from Netplex to RS232? Scratch Head 2   After all, there are lots of adapters that interface between different protocols. stir the pot / get cooking
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #15 on: October 23, 2010, 11:46:16 PM »
Okay, according to Foster's wiring diagram he posted -
the Netplex Molex contains 7 wires from the GEN II printer.
(see below)
What is the configuration of an RS232 printer like Buzz has?
This is 1/2 of the problem solved?  stir the pot / get cooking
I can't do ALL the work!  Crazy rotflmao

* GEN II Printer to Netplex Pin Outs.png (28.58 KB, 800x600 - viewed 305 times.)
Logged
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #16 on: October 23, 2010, 11:49:16 PM »
Converting serial protocols is not as simple as wiring pins together...  Professor

We all wish it was!   Crazy arrow Duh! Duh! Duh!
Logged
Thanks,
Bill
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #17 on: October 23, 2010, 11:50:51 PM »
Oh craps...I knew there had to be a catch... arrow
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #18 on: October 24, 2010, 01:25:13 AM »
You have to analyze at the two protocols and write a program to convert the data between them, then put the program on a chip and design an interface board.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #19 on: October 24, 2010, 02:45:23 AM »
Please post pictures of a printer in the top box.

The printer I have touches the back wall of the top box and sits on all the connectors at left rear of the top box.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113
« Reply #20 on: October 24, 2010, 04:48:17 AM »
Hi Guys

Its actually pretty easy to change the printer from Netplex to RS232 ports. This is done by a jumper on the processor board. You will also need to re program the sw so that it talks RS232 instead of Netplex.

Ian
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #21 on: October 24, 2010, 05:01:30 AM »
Ian, Buzz might benefit from some more details as he is sitting on a box of RS232 printers. yes
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113
« Reply #22 on: October 24, 2010, 05:19:23 AM »
Hi Guys

Did some thread searching as I remember we had a discussion about this before - http://newlifegames.net/nlg/index.php?topic=6299.0.

A nicely detailed guide on how to change the protocol is available here on Robert Sults great website -http://www.myslotnotes.com/myslotfiles/result0296.pdf.

Ian
Logged
TZtech
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 129
Offline Offline

Gender: Male
Posts: 1113
« Reply #23 on: October 24, 2010, 06:07:30 AM »
Hi Guys

Just to Clarify -

Gen 1 Futurelogics
PSA-66-ST (RS232)
PSA-66-001N (Netplex)
These have a interface board that need to be changed to switch protocols

Gen 2 Futurelogics
PSA-66-ST2R (RS232)
PSA-66-ST2N (Netplex)
These are jumper selectable

Ian
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #24 on: October 26, 2010, 03:38:24 AM »
Hey Buzz! You could sell those RS232 printers to BlueBird owners! yes

Copied from a GEN II manual...>>>
Quote
"Williams Bluebird uses Netplex firmware in an RS232 printer"
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.116 seconds with 19 queries.