Welcome, Guest. Please login or register.
June 11, 2024, 10:56:44 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  61-1 won't clear
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: 61-1 won't clear  (Read 3591 times)
rjpohl
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 103
Offline Offline

Gender: Male
Posts: 726



WWW
« on: November 20, 2008, 08:48:13 PM »

I kept getting a 49 error code and was pretty sure all the reels were OK, so I decided to do a complete ramclear.  Now I can't get the 61-1 to clear.  this is a s+ machine.  I know there is a wire that is usually tie wrapped to the right of reel #3.  I have put an wire lug and place under a screw on the cabinet in the past past and that would clear the 61-1.  I've tried a new reset switch too.

thanks
Bob
Logged

stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #1 on: November 21, 2008, 01:25:48 AM »

41  Reel 1 tilt
 Open and close door.
42  Reel 2 tilt
 Open and close door.
43  Reel 3 tilt
 Open and close door.
44  Reel 4 tilt
 Open and close door.
45  Reel 5 tilt
 Open and close door.
49  Reel mechanism disconnected
 Reconnect reel mechanism.  Open and close door.

These are the reels error codes right out of the manual.
"Code 49" means you have a bad connection.
The easiest solution is change your harness and/or reel.
The harder solution is to check your reel harness and those "tie-wrapped" wires on the reel itself.
Check for continuity-there's a broken or loose wire somewhere in the lines or at the connection points.
Can you show us a picture of that tie-wrapped" wire? I'm suspecting that...
Good luck and keep us posted!

 
Logged
rjpohl
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 103
Offline Offline

Gender: Male
Posts: 726



WWW
« Reply #2 on: November 21, 2008, 11:03:41 AM »

it cleared, put another board in and the machine worked fine, put old board back in and the 61-1 cleared.  Don't know why that helpled just glad it did.
Logged

stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447



« Reply #3 on: November 21, 2008, 02:29:06 PM »

Yes Rjpohl,
Give credit to Brianzz or Jay, I cant remember who but....

I remember reading a topic by them one time , on the old website,  about switching chips and boards to clear stubborn error codes.
I dont think anyone knew why it worked,  but it did rotflmao
Another good reason to own more than one S+!

Glad you got it going! applause
Logged
Brianzz
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 316
Offline Offline

Gender: Male
Posts: 1520



WWW
« Reply #4 on: November 21, 2008, 03:49:19 PM »

I've tried just about everything to not have to dig out the clear chips, I bought them and used them once and haven't seen them since  Tongue Out
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.082 seconds with 18 queries.