Welcome, Guest. Please login or register.
November 01, 2024, 01:36:38 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Bill Validators and Currency acceptors
| |-+  JCM DBV-45, DBV-145, and DBV-200 Bill Validators.
| | |-+  Bally 5500 Bill Validator Thief		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 5500 Bill Validator Thief  (Read 12452 times)
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« on: November 24, 2008, 11:43:41 AM »
I have a Bally 5500 machine that went completely dead – no error codes just dead.  I replaced the power supply and it brought the machine back to life with this problem.  When I insert a bill, the validator will take the money then beep turn red and blink 10 times and not issue credits.   Sometimes after it blinks it will return to green sometimes I have to reset the machine to get it green again. 
Could it be the mpu? The validator?  Power Supply? I don’t even know where to start.

Thanks!
Logged
Ozzy
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 254
Offline Offline

Gender: Male
Posts: 221
« Reply #1 on: November 24, 2008, 12:39:33 PM »
Try replacing the UART U34 on the MPU


cheers


Ozzy
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #2 on: November 24, 2008, 02:05:47 PM »
Any idea where I can get one?
Logged
Joeylc
Founder and CEO of New_Life_Games_LLC
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 287
Offline Offline

Gender: Male
Posts: 1312


KG7NLG


WWW
« Reply #3 on: November 24, 2008, 02:50:57 PM »
Quote from: jdkmunch on November 24, 2008, 02:05:47 PM
Any idea where I can get one?

http://www.happcontrols.com/
Logged
"The Seeds of our Ultimate Destruction are Slowly and Quietly being Planted in the Fertile soil of Political Correctness”
                                                                   Joey Carruthers 2011


Hottest day in the United States recorded August 11, 1983 at 2:21 p.m. was 132 F. - recorded in the shade at the Bullhead City Fire Department. 
BUT IT WAS A DRY HEAT

I Have gone to find myself, and if I get back before I return, keep me here!  ???





1-888-NLG-SLOTS 928-754-4147
e-Bay ID NewLifeGames_net
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #4 on: November 24, 2008, 03:11:43 PM »
Sorry to be such a newbie - but what exactly am  I looking for?  I looked at happcontrols.com for UART U34 but can't find anything. 
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: November 24, 2008, 03:25:34 PM »
Hi,
Type in "UART"on the Happs search box... not "UART U34".
The "U34" is the mark on your board next to the chip.
I noticed at Happs (on the third page,on the bottom, items #53, and #54) a couple of UART chips...however,
without looking at your board, I dont know which one to buy.
Logged
Ozzy
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 254
Offline Offline

Gender: Male
Posts: 221
« Reply #6 on: November 24, 2008, 03:26:48 PM »
IC 68681 Duart 40 pin STD


cheers


Ozzy
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #7 on: November 24, 2008, 03:27:54 PM »
Thanks!  I'll give it a try and let you know if it works!
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #8 on: December 01, 2008, 07:26:15 PM »
Well I'm sad to report that I just replaced the chip U34 and still have the same results.   I put in money - the machine takes it - Beeps and the DBV blinks red 10 times - no credits or error codes.    Any other ideas?
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #9 on: December 12, 2008, 08:10:58 PM »
Grrrrrr... I just replaced the entire MPU and I still have the same problem.  So now I guess that the issue is with the DBV200.  Is there anyway I can trouble shoot it?  I did read some of the other posts and the manual - but I don't have a test led to see what is going on.
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #10 on: December 12, 2008, 11:50:04 PM »
Well I got it working -

I don't know if this had anything to do with it but here is what I did -  I removed the dbv and jiggled all the wires

hooked it back up and went into diagnostic mode (press test until 3d shows up)  then i put in a bill and it displayed the correct domination.     

Closed her up and - working slot machine with bills!
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #11 on: December 13, 2008, 12:03:11 AM »
Quote from: jdkmunch on December 12, 2008, 11:50:04 PM
Well I got it working -

I don't know if this had anything to do with it but here is what I did -  I removed the dbv and jiggled all the wires

hooked it back up and went into diagnostic mode (press test until 3d shows up)  then i put in a bill and it displayed the correct domination.     

Closed her up and - working slot machine with bills!




For future reference you might want to download the manual on a DVB-200 off of JCM's web site.

http://www.jcm-american.com/support/tech_manuals.asp

Ron
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #12 on: December 13, 2008, 07:47:43 PM »
Quote from: jdkmunch on December 12, 2008, 11:50:04 PM
...
I removed the dbv and jiggled all the wires
...

I wonder if you have a loose connection or a damaged wire in the validator harness? If the problem comes back that's the first thing I'd check.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.104 seconds with 20 queries.