Welcome, Guest. Please login or register.
March 29, 2024, 12:08:46 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Bill Validators and Currency acceptors
| |-+  Other Bill Validators.
| | |-+  Tekbilt NV110-GA1 information
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Tekbilt NV110-GA1 information  (Read 1925 times)
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266



« on: November 19, 2010, 11:43:42 AM »

Seeing how there are a bunch of these on e-bay, people may be wondering about it. This is the consolidated info from this thread I had in the MAME section.
http://newlifegames.net/nlg/index.php?topic=10183

Here is the e-bay listing that has more pictures of the unit (if it's still active). Otherwise there are some pictures in the thread above.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150457514490

Here is the general info:

1 This unit is 110V AC. The plug only has 5 wires. 3 for power and 2 for the N.O. relay contacts. See picture below.
2 This unit ony accepts singles. It will only take them face up, but either way. Only taking singles will limit the usefulness.
3 There are 4 dip switches. The first 3 are for number of pulses per dollar. The last is for relay pulse speed. See picture below for switch settings.
4 The unit has a chromed face plate with two red LEDs that flash slowly when unit is powered and ready.
5 This unit is very simple in design and easy to disassemble. There is little to go wrong with it, but don't expect to find any parts for it.

Note 1 - You need to use the ground wire on the power. Otherwise there will be a lot of AC noise that can affect some controllers like the i-pac.
Note 2 - Having the 3 pulse select switches all set to on may be used for testing or calibration. I think it is for testing as it causes the BV to cycle about once every 5 seconds. This is the only way you can get a BV cleaning sheet to feed all of the way through it. In normal mode, it gets rejected before even getting half way in. Whether or not that is what it was meant for I don't know. I ran some regular bills though it in that mode in case it was somehow used for calibration, but I doubt the unit is 'smart' enough for that. In any case, it didn't seem to hurt anything.

Wiring diagram


DIP switch settings

Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.096 seconds with 19 queries.