Welcome, Guest. Please login or register.
November 26, 2024, 08:58:25 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  Double Lucky 7's game pauses during play		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Double Lucky 7's game pauses during play  (Read 3563 times)
xkey
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 260
Offline Offline

Gender: Male
Posts: 154



WWW
« on: December 28, 2010, 07:07:43 PM »
I have a dbl lucky 7's that wasn't working, just had a flashing "0" in the winner paid section.  I did a ram clear and turned the machine on, everything seemed normal except that after 5 or 6 plays the machine would pause for 3-6 seconds during play, i.e.  the reels would start spinning, then pause, then complete the play.  sometimes they will stop 2 times during a play.  It does not happen every play.  when the reels stop all the lights on the door go out.

anyone have any ideas that might be wrong?

thanks

jon
Logged
Momma says I need another job to keep this hobby!!
xkey
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 260
Offline Offline

Gender: Male
Posts: 154



WWW
« Reply #1 on: December 28, 2010, 07:31:42 PM »
canned air on dirty optics always does the trick..  solved the issue.
Logged
Momma says I need another job to keep this hobby!!
xkey
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 260
Offline Offline

Gender: Male
Posts: 154



WWW
« Reply #2 on: December 28, 2010, 08:44:51 PM »
 hissy fit bawling that wasn't it, it started doing it again. Silly Me!
Logged
Momma says I need another job to keep this hobby!!
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #3 on: December 28, 2010, 08:56:54 PM »
It's the power harness between the power supply and the motherboard.

http://newlifegames.net/nlg/index.php?topic=9367.0


With the power off, you can get some short-term resolution by unplugging and re-plugging that connector several times to make a better contact.  Long term, you'll need to replace the pins in the harness, or replace the harness.


Here's a picture that another member previously posted:

* S+_Burnt_Conn_.JPG (162.69 KB, 592x400 - viewed 260 times.)
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #4 on: December 28, 2010, 09:07:27 PM »
Quote from: knagl on December 28, 2010, 08:56:54 PM
It's the power harness between the power supply and the motherboard.

http://newlifegames.net/nlg/index.php?topic=9367.0


With the power off, you can get some short-term resolution by unplugging and re-plugging that connector several times to make a better contact.  Long term, you'll need to replace the pins in the harness, or replace the harness.


Here's a picture that another member previously posted:


To add to the picture, the connector is pulled off and is shown turned around.

Ron (r273)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #5 on: December 29, 2010, 07:26:21 PM »
The 2 green wires are grounds....why that second always burns up is a mystery to me...
People buy full harnesses on ebay for crazy amounts of money
when all you need to do is change the receptor female pin or
spray some "DeOxit" into the connector housing and onto the male pins.
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #6 on: December 30, 2010, 12:07:30 AM »
Quote from: stayouttadabunker on December 29, 2010, 07:26:21 PM
The 2 green wires are grounds....why that second always burns up is a mystery to me...
People buy full harnesses on ebay for crazy amounts of money
when all you need to do is change the receptor female pin or
spray some "DeOxit" into the connector housing and onto the male pins.

It has to do with the female pins in the connector. Most were made with one sided pins hence, only one side of
the male pins makes contact. I have one that has four sided female pins which won't burn like
the old ones.

With that said I know someone will pick up on male verses female pins. bust gut laughing

Ron (r273)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: December 30, 2010, 12:11:16 AM »
You mean male pins go inside of female receptionists?  Yeah!   Cool Thumbs-Up  
Oh...you meant "receptors?...oh!  bust gut laughing  face in palm
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.113 seconds with 21 queries.