Need Help With Blinking Green Light-MEI 6602

[vegasbaby]

HI
I have a game king that i just completed a i game change.Since that change the bill validator has only worked part time.It would take the bill,then after the 3rd bill,it would not take a bill,then i would play a few min,then insert the bill,and it took it.But now it wont take any bills and has a solid blinking green light.I have gone to the MEI web site,and it tells me the cause of blinking Green is CORRECT THE NETWORK CONDITION.This game king is not using a hopper.When i first power up the machine,you can here validator going through its start up cycle as normal.Dose any body have any tips to fix this problem.MODEL #6602.Before the game change the bill validator worked just fine.THANKS FOR ANY HELP INTHIS MATTER!!!!!!

[vegasbaby]

Here is a up date,now the blinking green has gone to solid green,i was able to insert dollar bills and a five dollar bill,but it wont take the 10 dollar bill.The same 10 dollar bill that i was able to run through the validator earlier.It just don't make any sense.Sometimes it will take a bill and spit it back out,sometimes i have to play for a few minutes,then try to insert the bill,sometimes that method works.All in all its not working like it should.THANKS FOR YOUR HELP

I HAVE REMOVED ALL TILTS,ITS SET AT NO TILTS.

[StatFreak]

Topics merged.


Please don't post multiple topics on the same issue, just reply to your first post with any updates.


Thanks,


StatFreak
Global Moderator

[Buzz]

I think I would check and see what my limits are set at.

[vegasbaby]

HI
Where do i check those limits?Also more facts on what its doing,today i was able to catch the bill validator with a solid green light,so i inserted two ones and a five and ten dollar bill,it accepted them.But refused to take a $20.00 or $100.00 and i used new bills and older bills,just took them in a spit them back out.The bills it did aceapt were both new and older.So I'm baffled as to why it will take some bills but not all.And of the bills it did take,it would not take them again,just spit them back out.THANKS FOR ALL HELP.

[kforeman]

I'm with Buzz, check your bill acceptor limit and credit limit on the machine.  since you just did a game change you may have accidentally set your machine to disable the validator at $20 or so.  to find your limits open the door and hit the white button on the mpu to access the operator menu.  then go to setup, machine options, and then hit credit style setup; this should be where your hopper, credit, jackpot, and bill acceptor limit settings are located.  for in-home use i would set them all as high as possible personally but that is up to you of course!  g/l