Welcome, Guest. Please login or register.
November 22, 2024, 01:16:50 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  WMS Reel Games. (Moderator: knagl)
| | |-+  WMS Jackpot Party Diagnostic Button Not Responding		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: WMS Jackpot Party Diagnostic Button Not Responding  (Read 3968 times)
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« on: March 14, 2011, 11:45:29 PM »
Hello to all. Long time viewer 1st time post. Awesome site, very knowledgeable folks. Have found answers to most of my questions in the past. Clap Thanks to all. I need  Help with my Jackpot Party Dotmation. I have had the machine for years with no problems, works well. I wanted to adjust the volume. When pushing the diagnostic button nothing happens. Scratch Head I checked the switch and it is good. Any ideas where to look from here would be appreciated.  Thanks in advance. Ed 
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #1 on: March 15, 2011, 02:38:28 AM »
Welcome to the site, erbs!

 NLG Welcome

I would trace the wires back to (I presume) the backplane to make sure that the switch is actually connected firmly to something.  The switch itself might be good, but if it's not connected to anything, it won't do you much good.   propeller
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #2 on: March 15, 2011, 02:37:42 PM »
Thanks for the welcome Knagl. Clap All wires are hooked up. There is an orange wire w/purple tracer going from the switch to the backplane. And 2 black wires w/ white tracers together at the switch, one goes to the backplane the other goes to 2 switches on the handle assembly. Goes from 1 switch to the second switch then goes from the second switch to the reset key switch and ends there. Checked continuity on all three wires, all good no breaks, all hooked up.  Scratch Head
Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #3 on: March 15, 2011, 07:49:59 PM »
I have seen this problem before. In the machine I was working on the ground was broken.
The issues is the machine is not seeing the door open. Try this:

1) Pull the two wires off the door cherry switch.
2) Use a jumper wire from ground (any metal on the machine) to one of the disconnected door switch wires. If you have no luck with the first one, try the other one.

When the machine is seeing a door open signal the dotmation screen will go dark and the credit meter will display "Door" and the win meter will display "Open"
Only after the machine see the door open will you be able to change settings.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #4 on: March 15, 2011, 09:50:21 PM »
KARMA to you Neonkiss. Button works fine applause . Went to check door cherry switch, no wires were attached. Found 2 black wires tied up with other wires. Hooked them up to the 2 bottom prongs on the switch and all is well. Thanks again for your help.  applause applause applause applause applause applause applause
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #5 on: March 15, 2011, 09:52:22 PM »
 Dancing Party

Fantastic!  Glad it was a pretty easy solution.  K+ to both of you.  I'll have to log this into my brain if/when it comes up again.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.092 seconds with 21 queries.