Welcome, Guest. Please login or register.
November 21, 2024, 09:14:13 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Coin Comparitors and Other Coin acceptors
| |-+  Coin Comparitors and Other Coin acceptors. (Moderator: a69mopar)
| | |-+  1996 IGT RED WHIT & BLUE W/NUDGE 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: 1996 IGT RED WHIT & BLUE W/NUDGE  (Read 22323 times)
the ShOcKeR
Guest
« Reply #25 on: May 21, 2011, 01:00:53 AM »
i cleaned the optics and still the coins go into the tray
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #26 on: May 21, 2011, 01:06:50 AM »
Do the test I mentioned above and if it works (the credit goes away when you close the door), you can then check your coin optics in the self test mode.

Be aware that you have two issues here. The coin comparitor AND the optics are both not working right. As noted earlier, you can hold the rake open and try to get the optics working. If the coins are going to the tray, they are never getting to the optics, so you may not know if cleaning them helped.
Logged
the ShOcKeR
Guest
« Reply #27 on: May 21, 2011, 01:20:03 AM »
OK I HIT THE SM.WHITE BUTTON 3 TIMES ,FOR 3 CREDITS AND WHEN I CLOSE THE DOOR IT GOES AWAY
Logged
the ShOcKeR
Guest
« Reply #28 on: May 21, 2011, 01:24:17 AM »
I lifted the gate and the coins go into the hopper ,but i do not get any credits
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #29 on: May 21, 2011, 01:26:29 AM »
Ok good, your door optics are working. You can go into the self test and check the coin optics with the input tests. If you don't know how to do this, let us know what SP chip you have.
Logged
the ShOcKeR
Guest
« Reply #30 on: May 21, 2011, 01:27:26 AM »
sp chip ? how do i do the test
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #31 on: May 21, 2011, 01:28:50 AM »
Quote from: the ShOcKeR on May 21, 2011, 01:27:26 AM
sp chip ? how do i do the test


Read and do this, and let us know the results.

http://www.newlifegames.net/spset/SPSS.htm
Logged
the ShOcKeR
Guest
« Reply #32 on: May 21, 2011, 01:36:36 AM »
0932
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #33 on: May 21, 2011, 01:42:41 AM »
Quote from: the ShOcKeR on May 21, 2011, 01:36:36 AM
0932


Here is the PSR for SP932. But I'm not sure how to run a coin optics test on that SP. Hopefully someone else knows.

If it's like later SP chips, this may help

<borrowed form another thread>
Quote from: Jim on May 13, 2009, 03:19:27 PM
...10-1, 11-1 and 12-1 are three tests for the three optics in the optics circuit.

with the coin comp. removed, test 10-1 selected, you should be able to put a folded piece of paper or thin cardboard cut to size( to fit thru the black coin optic piece) and while observing the display watch as it changes from a 1 to a 0.  do this for the remaining others, e.g. 11-1 and 12-1,......
* SP932.doc (151 KB - downloaded 193 times.)
Logged
the ShOcKeR
Guest
« Reply #34 on: May 21, 2011, 01:45:05 AM »
so do you think i need new optics or a new coin comparition
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #35 on: May 21, 2011, 01:56:20 AM »
Sounds like your optics board may be bad. But running an optics test will tell for sure.
Logged
the ShOcKeR
Guest
« Reply #36 on: May 21, 2011, 01:56:52 AM »
how do i do a optics test
Logged
the ShOcKeR
Guest
« Reply #37 on: May 21, 2011, 01:57:32 AM »
i checked the fuses and there all good
Logged
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #38 on: May 21, 2011, 02:01:05 AM »
Quote from: the ShOcKeR on May 21, 2011, 01:56:52 AM
how do i do a optics test


You use the self test mode. The PSR usually tells you how to do it. The PSR for the SP932 does not go into detail about it though. That is why I was hoping someone else would know how it works for that SP chip.

But you can try this and see if it works.

http://newlifegames.net/nlg/index.php?topic=11817.msg106077#msg106077
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #39 on: May 21, 2011, 02:14:39 PM »
remove Q-2 or Q-4 on the optics board.
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
the ShOcKeR
Guest
« Reply #40 on: May 21, 2011, 04:28:22 PM »
OK after messing around with it for another 1hr today ,with the help from OHIO GAMMING. The owner had me look the the plugs and the wires that go to and from the coin comp., so i looked at  it for the last time b4 i send it out the coin comp. for repairs, So i inserted a coin and now is working great..... it must have beed a bad connection or something.All i did was look at the plugs and the wire,did some wiggiling and presto it works.... I would like to thank everyone who helped me out.I learned more about the machine in 2 days ,than the 10 years of owning it. Most of all i would like to thank THE OWNER OF OHIO GAMMING for being so helpful over the phone to help me getting it going again.....GREAT CUSTOMER RELATIONS

thank you everyone
Steve Panebianco and Family
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #41 on: May 21, 2011, 04:38:57 PM »
Steve   I have a question for you.  What model machine do you have ??   S+ or a S 2000
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #42 on: May 21, 2011, 04:53:06 PM »
Quote from: the ShOcKeR on May 21, 2011, 04:28:22 PM
OK after messing around with it for another 1hr today ,with the help from OHIO GAMMING. The owner had me look the the plugs and the wires that go to and from the coin comp., so i looked at  it for the last time b4 i send it out the coin comp. for repairs, So i inserted a coin and now is working great..... it must have beed a bad connection or something.All i did was look at the plugs and the wire,did some wiggiling and presto it works.... I would like to thank everyone who helped me out.I learned more about the machine in 2 days ,than the 10 years of owning it. Most of all i would like to thank THE OWNER OF OHIO GAMMING for being so helpful over the phone to help me getting it going again.....GREAT CUSTOMER RELATIONS

thank you everyone
Steve Panebianco and Family

What I have been finding is that most of the time it is something as simple as a poor connection.
K+ to you & K+ to Ohio Gamming for going the extra to help you on phone.
Ford
« Last Edit: May 21, 2011, 05:21:57 PM by FORDSBS » Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #43 on: May 21, 2011, 05:18:58 PM »
 +1 (Karma, or whatever)
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #44 on: May 21, 2011, 06:34:06 PM »
The reason for my question on the model of the machine is, if it's a S+ it should have worked with the rake blocked open. This is not true with a S 2000. 1996 you would think it's a S+.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #45 on: May 21, 2011, 06:36:52 PM »
Buzz, earlier he states he has a SP932 so it is an S-Plus machine
Logged
the ShOcKeR
Guest
« Reply #46 on: May 21, 2011, 08:24:56 PM »
i was told it a S+ machine,,,how do i tell? so i know for sure,for future problems its a  IGT built in 2/96 model # B5036CFW red white & blue deluxe with the nudge feature
Logged
the ShOcKeR
Guest
« Reply #47 on: May 21, 2011, 08:33:27 PM »
AGAIN I WOULD LIKE TO THANK EVERYONE WHO HELPED ME.....the power of the internet and the kind and helpful people that make this site great place to get help..HATS OFF TO ALL OF YOU
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #48 on: May 21, 2011, 09:29:41 PM »
Quote from: the ShOcKeR on May 21, 2011, 08:24:56 PM
i was told it a S+ machine,,,how do i tell? so i know for sure,for future problems its a  IGT built in 2/96 model # B5036CFW red white & blue deluxe with the nudge feature

It is an S-Plus machine
Logged
Pages: 1 [2] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.128 seconds with 18 queries.