IGT PE+ Video poker White HOT Aces HELP!!!

[Mouse]

You mean two boards one for my old one and one for my new board... or is there a mystery board i don't know about yet... oh dear! lol

I am glad that i don't have to take them all the way out but how will i spray some of the electrical contact cleaner on it then? (I will pick up a can tomorrow I'm hoping)

[Mouse]

******UPDATE*******

Ok so the ebay seller who sold me the new CPU board asked me if i got it and if it was working. I said that I got the board but that I was still having problems and asked him for advice, He asked for some numbers and sent me a whole "new" board.

So now the machine has a CLEAR SCREEN (no wiggels, lines or shakes!!) When i put the board in turned it on.. pressed the test button till i heard the ding sound, closed the door and turned the reset key i was very happy to see it run through a bunch of stats and different screens. Problem was that it went to a screen saying something about recovering memory and to please wait... then to the call attendant.. then back to please wait.. then call attendant. That is where it stayed. I feel so close but I am still so lost
Any advice?

[Yoeddy1]

So your screen isn't jumbled up anymore?  Try turning your jackpot key.  Anything change?

Jason

[Yoeddy1]

Open and close your door too.  Any change?

Jason

[Mouse]

whats the jackpot key? I turn the key on the right side that i call the "reset key" is it the same thing? I have been opening and close but not turning the key at the same time.

[Yoeddy1]

We may need Buzz to jump in here, but we're getting close.  I'm not sure if a set chip is required.  At any rate try either of the procedures below.  I have the PE plus games emulated and I run 1 of the 2 procedures below depending on the game.

1.
be sure the door is opened
"CMOS DATA" will be displayed
press the self-test button
be sure the door is opened
"EEPROM DATA" will be displayed
press the self-test button
be sure the door is closed


2.
be sure the door is opened
"CMOS DATA" will be displayed
press the self-test button until a "beep" is heard
be sure the door is closed
press the jackpot reset button
be sure the door is opened
"EEPROM DATA" will be displayed
press the self-test button
be sure the door is closed

Thanks
Jason

[Mouse]

ok, i tried both, no luck it just keeps going between "call Attendent" and "verifying game memory please wait"

[Yoeddy1]

Well, before I hit the hay, I was reading some other posts and if the CMOS is kaput, there may be a chance that a memory clear chip may be needed.  It has fixed other circumstances.  You might power it off and back on and try running the procedures again that I mentioned before.  Otherwise, let's see what some of the other members have to say.

Good luck!

Jason

[Mouse]

Thank You for trying Jason

[knagl]

ok, i tried both, no luck it just keeps going between "call Attendent" and "verifying game memory please wait"

Is it cycling between these on its own, or is the message changing as you do something to the machine?  Since we're not there with you at the machine, you need to please tell us in as much detail as you can exactly what is happening so we can help you get up and running.

When you're seeing "Call Attendant", is that message on top of a set of five cards, or is it just in small letters at the top of the screen?

Maybe post a picture or two of what you're seeing so we can better help you?

Did the new board come complete with chips, or did you have to move your chips over?

What is displayed on the screen when you open the door (please tell us everything that is on the screen, or post a picture)?