Help! Hot Peppers - 2 coin Slot Machine IGT S/S+ model

[oaks05]

Was playing the slot machine the other day, all of sudden coins would drop on every win instead of going to the credits won section which lead to getting a 3200 error code(extra coin dropping) anyways after resetting the machine finally is where I'm stuck now, on start up the bill validate makes it noise than after that the slot wheels start to spin usually but now they don't, nothing happens after the bill validate goes through its start up (wheels don't spin) and nothing is lit up on the screen to say I have any error codes, none of the buttons are lit up so I'm at a lose on what to do any help would be greatly appreciated~!

[Buzz]

Power cord  from Power supply to mother board. Unplug it from mother board and look at back side, bet you can see a burned plug with a green wire.

In this pic. you can see a good cord and and one I have modified. The mod is pretty easy if you know how to solder. I cut the bad plug off, slide some shrink tube on to the wires, then solder the wires to the mother board. Slide the shrink tube in place and heat until shrunk.  In the last week I have had to do this mod 3 times.

If you don't feel like trying this. Try bending the contacts inside the plug. Sometimes this will work but bare in mind it's going to do it again. Solder it once and forget it for ever.

[Buzz]

Here is a Pic. of a burned plug.

[oaks05]

life saver, didn't replace anything yet but i pulled the power out slightly and its working again and you were right that green wire is def burned so I'll have to look into that in the new future thanks again~!

[ChizzleMonkey]

Repin the faulty connector with new molex. It works like new again.