Welcome, Guest. Please login or register.
November 22, 2024, 11:09:04 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  S+ Bill Validator Door Lock Problem		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S+ Bill Validator Door Lock Problem  (Read 5261 times)
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« on: August 30, 2011, 07:43:26 PM »
I just purchased Two Bill Validator door Locks for my 2 S Plus machines. 

Both Cams are just slightly do long for the Bill Validator's.  They do not clear the cam slot inside the Validator doors.
The Cams measure 3 cm from the center of the double D hole to the end of the CAMs (approx 1 and 3/16 inch long)
The size I need are about 1 to 1 and 1/16 inch from the center double D hole.

Are there more than one size of Cam for S Plus Bill Validator doors?

* IMG_0319.JPG (555.86 KB, 2272x1704 - viewed 348 times.)
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #1 on: August 30, 2011, 08:12:45 PM »
Quote from: CommTech on August 30, 2011, 07:43:26 PM
I just purchased Two Bill Validator door Locks for my 2 S Plus machines. 

Both Cams are just slightly do long for the Bill Validator's.  They do not clear the cam slot inside the Validator doors.
The Cams measure 3 cm from the center of the double D hole to the end of the CAMs (approx 1 and 3/16 inch long)
The size I need are about 1 to 1 and 1/16 inch from the center double D hole.

Are there more than one size of Cam for S Plus Bill Validator doors?





A hacksaw or bench grinder will make it  shorter.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
poppo
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 248
Offline Offline

Gender: Male
Posts: 3266
« Reply #2 on: August 30, 2011, 08:45:58 PM »
Quote from: Buzz on August 30, 2011, 08:12:45 PM
A hacksaw or bench grinder will make it  shorter.


 Agree with Post

But to answer thre other question, yes there are different sizes (like for the belly glass door, etc).
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: August 30, 2011, 10:19:18 PM »
Hmm...Yup...I'd go with a nice little trim using a bench grinder...  yes
Logged
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« Reply #4 on: August 30, 2011, 11:47:05 PM »
Bench Grinder is what I was thinking also. 

I'll take it to work with me tomorrow and make it a little shorter.
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #5 on: August 31, 2011, 12:02:31 AM »
If you end up buying more for other machines or for other locks on that machine, take the measurements with you and the locksmith should be able/willing to cut it for you when you buy the lock. That's what I did after hand filing my first tang (The only tool I had at the time. Duh!  Case hardened steel is a beach to file. bust gut laughing)
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #6 on: August 31, 2011, 02:06:10 AM »
Quote from: StatFreak on August 31, 2011, 12:02:31 AM
If you end up buying more for other machines or for other locks on that machine, take the measurements with you and the locksmith should be able/willing to cut it for you when you buy the lock. That's what I did after hand filing my first tang (The only tool I had at the time. Duh!  Case hardened steel is a beach to file. bust gut laughing)

David  They are only mild steel, not case hardened.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #7 on: August 31, 2011, 04:47:07 AM »
Quote from: Buzz on August 31, 2011, 02:06:10 AM
Quote from: StatFreak on August 31, 2011, 12:02:31 AM
If you end up buying more for other machines or for other locks on that machine, take the measurements with you and the locksmith should be able/willing to cut it for you when you buy the lock. That's what I did after hand filing my first tang (The only tool I had at the time. Duh!  Case hardened steel is a beach to file. bust gut laughing)

David  They are only mild steel, not case hardened.

Wow, I'm weaker than I thought. It took me ages to file down that thing. Duh! hissy fit
That was back in 2000 or so. I didn't have anything except a metal file.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #8 on: August 31, 2011, 07:11:23 AM »
Maybe a little late, but I thought that this would be good info for anyone who researches this in the future. stir the pot / get cooking

CaptainHappy CaptainHappy
* IGT S+ Lock Specifications.pdf (95.39 KB - downloaded 163 times.)
Logged
  Come sail away, Come sail away Come sail away with me..
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #9 on: August 31, 2011, 07:39:37 AM »
Not for S+, but this is as good a place as any for me to share some lock specs for other IGT Machines if someone searches in the future...

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #10 on: August 31, 2011, 07:41:32 AM »
Quote from: CaptainHappy on August 31, 2011, 07:39:37 AM
Not for S+, but this is as good a place as any for me to share some lock specs for other IGT Machines if someone searches in the future...

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.121 seconds with 20 queries.