Welcome, Guest. Please login or register.
November 22, 2024, 01:30:54 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  WMS Reel Games. (Moderator: knagl)
| | |-+  Dotmation checksum error chksum		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Dotmation checksum error chksum  (Read 8187 times)
cfh
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 113
Offline Offline

Posts: 458



WWW
« on: February 06, 2009, 01:56:15 AM »
Just for the notes, on the dotmation, when you get a checksum error:
PROM0 = xu10
PROM1 = xu3
PROM2 = xu4

EPROM speed on the xu3 and xu4 seem to be an issue.
I have burned ROMs with good checksums, but the
game complains "PROM1 chksum error" type thing.
reburn on a different EPROM and the problem goes away.
seems like 100ns or faster is needed for the dotmation.
Not nearly an issue for the CPU board EPROMs.
« Last Edit: April 27, 2009, 11:24:33 AM by cfh » Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #1 on: February 06, 2009, 07:36:28 AM »
Good info -- thanks Clay!   applause
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
Randy0777
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 311
Offline Offline

Gender: Male
Posts: 561
« Reply #2 on: May 20, 2009, 11:11:59 AM »
Thanks Clay. Just switched chips and Prom1 error is what I'm getting...atleast I know what it is now.
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #3 on: May 20, 2009, 07:10:14 PM »
You'll also get checksum errors if you use different size EPROMs and don't change the jumpers.  Some games require different sized dot EPROMs and jumper changes to go with them.   propeller
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
Randy0777
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 311
Offline Offline

Gender: Male
Posts: 561
« Reply #4 on: May 20, 2009, 07:29:19 PM »
Thanks knagl .  I thought about that when the error came up ,but for some reason I did not think that was it  Duh! . I did a search for "Prom1 error" and seen what Clay said and figured I needed to  burn another chip. After reading your comment,I checked the chips....Sure enough u3 on the one I took out was a 4 and the one I installed was a 8  loser . Anyway,I just installed a differnt game all together (at least I learned the juristiction RN3 jumpers today  yes ) Off to pool league,so I'll try the game again when I get home.
« Last Edit: May 20, 2009, 07:53:03 PM by Randy0777 » Logged
Randy0777
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 311
Offline Offline

Gender: Male
Posts: 561
« Reply #5 on: May 27, 2009, 02:25:52 AM »
Finally got around to fixing the problem.... burnt a new chip and all was well. (Sorta  Scratch Head,)
Logged
cfh
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 113
Offline Offline

Posts: 458



WWW
« Reply #6 on: May 27, 2009, 08:16:03 AM »
On the dotmation display board, EPROM speed (or lack or it)
can often cause a checksum error. reburning the chip usually
fixes the problem (assuming the 4/8meg jumper is set correctly.)
Logged
Billythekid
NLG Member 101 to 500 Post
***

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 103


Oct 2011
« Reply #7 on: March 09, 2010, 01:22:08 AM »
I'm having the same problem, I couldn't find any documentation on the jumper positions for 1 vs. 4meg chips.... they are 3 prong jumpers so you can connect center to top or center to bottom or completely off... anyone know which way is which?

Also there are two jumpers next to the OS chip on the dotmation controller... where should those be? My OS boots up just fine... just getting checksum on XU3..
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #8 on: March 09, 2010, 02:33:09 AM »
...without being near my machine, I'd try moving the jumper for the XU3 (in the Dot box) to the "other" position and try booting it.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
Billythekid
NLG Member 101 to 500 Post
***

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 103


Oct 2011
« Reply #9 on: March 09, 2010, 03:07:24 AM »
I have the newest OS version running in the top box and when testing a known set of good game display chips the jumper postion does not matter. The known chips at 4001's for Big Bang. I'll have to get a new set of game chips for the game I'm trying to install.
Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #10 on: March 09, 2010, 11:53:03 PM »
Quote from: Billythekid on March 09, 2010, 03:07:24 AM
I have the newest OS version running in the top box and when testing a known set of good game display chips the jumper postion does not matter. The known chips at 4001's for Big Bang. I'll have to get a new set of game chips for the game I'm trying to install.

Remember top game chips MUST match the game chips on the MPU.
For trouble shooting purposes you can not change just the top dot box chips with another set of game chips in the MPU.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 21 queries.