Welcome, Guest. Please login or register.
November 22, 2024, 03:19:51 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  IGT S+ - no power to DOOR emitter optic. FIXED!!!!		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: IGT S+ - no power to DOOR emitter optic. FIXED!!!!  (Read 2926 times)
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« on: July 04, 2012, 12:21:59 PM »
Have a bad MOTHERBOARD (not the wiring - not the mpu  etc)  - problem is in the mother board -  get 7v to the receiving optic - but the emitter is dead.  traces "look" good - there isn't much on the mother board - so what would be the cause?  I am short on motherboards - bought a bunch of macihines with blown batteries and destroyed motherboards hence the need to try to fix one. 
« Last Edit: July 05, 2012, 01:33:40 PM by FOXSSLOTS1 » Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #1 on: July 05, 2012, 12:45:00 AM »
Quote from: FOXSSLOTS1 on July 04, 2012, 12:21:59 PM
Have a bad MOTHERBOARD (not the wiring - not the mpu  etc)  - problem is in the mother board -  get 7v to the receiving optic - but the emitter is dead.  traces "look" good - there isn't much on the mother board - so what would be the cause?  I am short on motherboards - bought a bunch of macihines with blown batteries and destroyed motherboards hence the need to try to fix one. 

 Scratch Head Scratch Head Barry maybe I'm all wet, but why would the receiving optic even need power ???? I admit I've never taken a meter and checked.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« Reply #2 on: July 05, 2012, 02:09:09 AM »
Looking at the schematic, I see that the Door Emitter Optic line travels down into the Motherboard through J3, then right back out through pin 2 of J10 (Door LED -), then it loops right back in again to pin 1 of J10 (LED +).
So the Emitter LED optic go's through 4 separate molex plugs by my count.  Any one of those may have bad pin contacts.  I would think that would be more likely than an open motherboard trace.
You might start by checking motherboard pin 1 of J10 to see if you have voltage there. That is the first point of exit off the motherboard.
Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #3 on: July 05, 2012, 07:20:43 AM »
thank you - will check those points - my schematic is a bad copy so i could not find these points
Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #4 on: July 05, 2012, 01:33:13 PM »
FIXED!!!  - there was a small dent/break on the trace for pin 1 to resister?  jumped and the mother board works!!!  thank you again.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.121 seconds with 19 queries.