Welcome, Guest. Please login or register.
November 22, 2024, 02:36:18 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  Mikohn Progressive Systems.
| | |-+  S2000 No link to progressive AHHHH!!		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: S2000 No link to progressive AHHHH!!  (Read 14262 times)
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« on: November 15, 2012, 07:44:02 AM »
I've been pulling my hair out. After days of working on my S2000 Tabasco 3CM progressive CHAM2+, I made some head way.

1. Key Chip setting set
2. Mikohn Settings set
3. After hours finally got the Mikohn programmed via serial port
4. Made wiring harness to hook to machine

I got the display to say 12,000.

But my machine still says no link to progressive.

One time when my machine booted up it incremented my progressive by one cent. And then it gave a C51 when I unplugged the cable going from the progressive board to the machine. I never got it to do it again.

The only thing I haven't done is change the battery, but I don't think that would cause a no link?

I'm all out of ideas, I think I have read every thread in this section.

Any ideas??

-Tom-
Logged
stormrider
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 131
Offline Offline

Gender: Male
Posts: 772
« Reply #1 on: November 15, 2012, 10:42:26 AM »
Quote from: twa8000 on November 15, 2012, 07:44:02 AM
I've been pulling my hair out. After days of working on my S2000 Tabasco 3CM progressive CHAM2+, I made some head way.

1. Key Chip setting set
2. Mikohn Settings set
3. After hours finally got the Mikohn programmed via serial port
4. Made wiring harness to hook to machine

I got the display to say 12,000.

But my machine still says no link to progressive.

One time when my machine booted up it incremented my progressive by one cent. And then it gave a C51 when I unplugged the cable going from the progressive board to the machine. I never got it to do it again.

The only thing I haven't done is change the battery, but I don't think that would cause a no link?

I'm all out of ideas, I think I have read every thread in this section.

Any ideas??

-Tom-

No Link to progressive could be many things

Make sure psp setting is  F3=SNGL F4=M08 & F8=MS08 for Igt

ChamII+ board not being set to SA

Could also be wrong setting in key chip menu
7.3.2 select: None

Could also be the cable you made ?

Please post all the settings you made inside psp and the key chip menu

Sorry off to work for the day good luck

You might want to check out Ron's r273 notes
that are attached.

Tim
* r273 CHAMII+ PSP Settings.zip (21.54 KB - downloaded 253 times.)
« Last Edit: November 15, 2012, 11:04:56 AM by stormrider » Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #2 on: November 15, 2012, 04:55:00 PM »
Make sure psp setting is  F3=SNGL F4=M08 & F8=MS08 for Igt   Already Did this

ChamII+ board not being set to SA       Its set to SA

Could also be wrong setting in key chip menu  7.3.2 select: None        Should it be NONE? I have it on linked, i thought that is what it suppose to be, or is 7.3.2 about the video display? because i have that set to none.

Could also be the cable you made ?      I made two new cables, same result

Please post all the settings you made inside psp and the key chip menu

Sorry off to work for the day good luck

You might want to check out Ron's r273 notes         i followed rons notes to a tee. Word for Word
that are attached.

------------------------------------------------------------------------------------------------

Thanks for the notes, any other ideas??

Could there be something wrong with my machine? There are no dip switches to flip or anything right?

When i get home ill have to post all my settings.

Thanks

-Tom-
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #3 on: November 15, 2012, 05:02:46 PM »
Try F#3  to different than SA. Not sure what it will say but something like multi or linked.
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #4 on: November 15, 2012, 05:18:38 PM »
Quote from: FORDSBS on November 15, 2012, 05:02:46 PM
Try F#3  to different than SA. Not sure what it will say but something like multi or linked.

Are you talking about on the display? or in PSP? I think the display can be set to SA or a number.
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #5 on: November 15, 2012, 05:20:09 PM »
psp
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #6 on: November 15, 2012, 05:21:23 PM »
Quote from: FORDSBS on November 15, 2012, 05:20:09 PM
psp

Ok tonight when i get home ill check it out. Thanks for the idea. if it still dont work ill post up my settings. Thanks!
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #7 on: November 15, 2012, 05:24:51 PM »
In PSP   set F3 to MANY  for IGT linked

That's what I have mine set @
Logged
stormrider
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 131
Offline Offline

Gender: Male
Posts: 772
« Reply #8 on: November 15, 2012, 05:31:35 PM »
In the key chip menu set display to none
 and Link level 1 for progressive.
 I do not have the key chip. Numbers in front of me
 at work right now typing on my phone.
 can help you later this evening when I get home.
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #9 on: November 15, 2012, 05:33:13 PM »
Quote from: stormrider on November 15, 2012, 05:31:35 PM
In the key chip menu set display to none
 and Link level 1 for progressive.
 I do not have the key chip. Numbers in front of me
 at work right now typing on my phone.
 can help you later this evening when I get home.

I'm 99% sure that what i have in mine. but ill double check tonight. Thanks!
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #10 on: November 15, 2012, 05:37:31 PM »
Quote from: FORDSBS on November 15, 2012, 05:24:51 PM
In PSP   set F3 to MANY  for IGT linked

That's what I have mine set @

Will do. ill let you know the result. I REALLY REALLY hope it works. Otherwise i will end up throwing my machine through the window. Not an easy feat......
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #11 on: November 15, 2012, 05:40:38 PM »
Your profile does not say where your located. Where are you?
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #12 on: November 15, 2012, 05:42:14 PM »
Quote from: FORDSBS on November 15, 2012, 05:40:38 PM
Your profile does not say where your located. Where are you?

Profile Fixed Smiley
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #13 on: November 15, 2012, 05:44:19 PM »
Too far to come & stand under your window to catch machine if you throw it out.
I think if you do the settings we said it should work.  GOOD LUCK tonight.
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #14 on: November 15, 2012, 05:45:13 PM »
lol, Thanks
Logged
stormrider
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 131
Offline Offline

Gender: Male
Posts: 772
« Reply #15 on: November 15, 2012, 09:58:13 PM »
Tom,

Keychip menu
7.3.1.1 make sure it is set to and shows
Level 1 Link Level 1

7.3.2 None

On the S2000 mpu you are using SG363 for GME1&2 correct

The cable you made goes from ChamII+ J7 to S2000 mother board J15
with the following pins wired.

 J7                  J15
pin 13------------pin 2
pin 11------------pin 1
pin 3-------------pin 3

Double check that cable and make sure the key chip settings are correct
If it doesn't work post back all your psp and key chip settings for us.

Tim
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #16 on: November 15, 2012, 10:15:33 PM »
Here are some pictures... Just got home

-Tom-

* securedownload (2).jpg (744.59 KB, 1632x1224 - viewed 412 times.)

* securedownload.jpg (708.74 KB, 1632x1224 - viewed 407 times.)
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #17 on: November 15, 2012, 10:24:08 PM »
Quote from: FORDSBS on November 15, 2012, 05:24:51 PM
In PSP   set F3 to MANY  for IGT linked

That's what I have mine set @

Changing it to Many did not fix it.... i changed it back to SNG
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #18 on: November 15, 2012, 10:27:22 PM »
http://newlifegames.net/nlg/index.php?topic=20330.msg165755#msg165755

Should i try it on standalone like Foster mentioned?

-Tom-
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #19 on: November 16, 2012, 05:14:36 AM »
OK my psp settings are exactly like  r273 CHAMII+ PSP Settings.zip....

However one issue...

ODOMETER CONTROL                     Page 5

MULTIPLE CONTROLLER SET UP      Page 6

When i set all the settings and hit send button: it says Default Error, check controller # 1.

If i hit load on page 5 and 6 it load the data from the controller properly... however i cant send

However every other page it send finds...

Maybe this is the issue? But why would i get those error on just those pages?

-Tom-
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #20 on: November 16, 2012, 06:40:25 AM »
Or do i need the GME SG00363?

Thanks guys!

-Tom-
Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #21 on: November 16, 2012, 01:57:10 PM »
Have you tried rebooting both (machine and program) and immediately sent page 6 then 5?

You must have page 6 sent and excepted before it will work.

Ron (r273)
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #22 on: November 16, 2012, 04:13:50 PM »
Quote from: r273 on November 16, 2012, 01:57:10 PM
Have you tried rebooting both (machine and program) and immediately sent page 6 then 5?

You must have page 6 sent and excepted before it will work.

Ron (r273)

I will try this, and report back. Thanks for the suggestion

-Tom-
Logged
twa8000
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 51
« Reply #23 on: November 18, 2012, 08:02:45 PM »
Try the immediate send idea.. still will not take those settings. Is there something corrupt in the controller? Is there a way to wipe it clean? i tried setting the display to birth yes to clear everything, but that must not really clear all settings...

-Tom-
Logged
Neonkiss
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 436
Offline Offline

Gender: Male
Posts: 2084
« Reply #24 on: November 18, 2012, 10:00:23 PM »
Tom,
I just did this myself for the very first time.
I now have a working progressive in one of my S2000

I would not have been able to do this without Ron's cheat sheet. Thanks Ron...  applause applause applause
Even with that, I did have some difficulties navigating through the menus. But it did eventually click in my mind. That cheat sheet is a great tool. If you want me to try to help you over the phone send me a PM with a number to contact you at. I'll try to help where I can, but no promises as I'm just learning this myself.
Logged
Nothing brings people together better than a common enemy
343 / 60 brothers lost on that day.
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.164 seconds with 20 queries.