Welcome, Guest. Please login or register.
November 17, 2024, 04:07:11 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S2000 Multiple Errors		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S2000 Multiple Errors  (Read 2571 times)
mattmcca
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 5
« on: November 16, 2012, 02:20:27 AM »
I am having a problem with my Mucho Dinero S2000 using TITO. When I first approached the machine an error popped up saying something along the lines of "An extra coin has been dispensed" (I forget what it exactly said but something like that). All of my setting are set for coinless mode so it did not make sense. I tried a soft ram clear on it to try and clear the error. I turned it back on and ended in a "Coin In Jam". I then tried to Key it. When it came back up all my buttons were disabled and I was unable to look through the options. It will not let me look through the options with the Coin In Jam error. I tried to replace the board but that did not help along with trying to replace the I/O cards and disconnecting the printer. After that I got an error saying "Meter Disconnected". Ultimately it is stuck in a Coin In Jam now and I am unable to clear it. Any help I would appreciate it.
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #1 on: November 16, 2012, 02:27:19 AM »
Does your game have the bypass plug on the coin comparitor harness used on games without coin handling. If so, is it plugged tight?
Logged
mattmcca
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 5
« Reply #2 on: November 16, 2012, 02:38:16 AM »
It is. I just went back and turned the machine back on. It is now only saying Meter Disconnected. It allows me to get to the options menu but will not let me use the buttons to guide my way through (buttons were not lit up). Then I close the door and the navigation buttons were all lit up like they usually are in the options menu.
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #3 on: November 16, 2012, 02:44:16 AM »
Pull and reseat both your IO boards on in the door and the other next to the mpu board . *****NOTE**** POWER OFF BEFORE DOING THIS
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
mattmcca
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 5
« Reply #4 on: November 16, 2012, 03:14:38 AM »
I just tried reseating both of them but the error came back up Meter Disconnected. I thought it may have been the IO boards in the first place so I tried switching out the old ones with known good ones but it has not helped yet. Any more suggestions I would appreciate it.
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #5 on: November 16, 2012, 03:28:49 AM »
Go to Search at the top of page and type in meter disconnected and see how others had fixed this problem . P.B.
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #6 on: November 16, 2012, 03:44:24 AM »
Do you have clear and key chips for the machine? It's been known to work on persistent phantom errors where there may not be anything actually wrong with the machine. Also, you might try opening and closing the main door several times as errors, even of the same type, can stack and only clear one at a time as you open, close and fully latch the door. And, as PB stated, NEVER remove boards with the machine turned on
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 19 queries.