Welcome, Guest. Please login or register.
November 22, 2024, 11:29:40 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Real, Reel question.
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Real, Reel question.  (Read 1837 times)
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« on: November 16, 2012, 02:30:05 AM »

I am having a problem with one the reels on my 5 reel machine. I keep getting a tilt on reel #4, It's like the reel locks, and won't move.
I put in another set of reels and no problem, they all work. switch back, same problem.
So I am thinking that I probably have a bad stepper motor on my #4 reel.  Scratch Head
My question is,  does it really matter which reel goes it which slot? (1 thru 5) Or are they numbered specifically for each slot?
Could I just get a new stepper motor and replace it?
Ive never really had any problems with reels before.
Thanks everyone,
Jim.
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #1 on: November 16, 2012, 02:34:21 AM »

The only thing that matters on reel order is the reel strips themselves. As far as the physical reel, if you have a good replacement, swap them and swap the reel strip. Or just swap the motor, but I try not to remove reel baskets from motor shafts any more than I have to
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #2 on: November 16, 2012, 11:31:58 PM »

The only thing that matters on reel order is the reel strips themselves. As far as the physical reel, if you have a good replacement, swap them and swap the reel strip. Or just swap the motor, but I try not to remove reel baskets from motor shafts any more than I have to
That is what I suspected. I will see about locating another stepper motor.
Thanks for the info!
Jim.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.102 seconds with 20 queries.