PSP Message Programming for Double Width Char ? SOLVED

[stormrider]

Okay trying to get double width char set up under jpot.do file
PSP manual states:
Dbl Width Char ‖ Ctrl+F4
Defines text lines to be two pixels wide, where possible. This command is similar to bold text.
Place it after Travel motion text lines.It is a toggle command; turn it off with the Sngl Width command
which I did with no success  

I have the chamII+ working (MFILE set to 0) showing current jackpot amount and my scrolling message
as I like, but I really want the Double size text to show up instead.

Have tried many different combo's of commands with No Luck  
Hoping someone can post a working string of commands that will show double size.

I could have sworn I had one set up this way before and saved the info
but I can't find anything in my notes  

Thanks. Tim

[FORDSBS]

HERE YOU GO. 

ODMTR81

[stormrider]

  Ford......That did it 

After screwing with countless psp strings
It ended up being the ODMTR8 setting on the chamII+ board to make letters double width 
Which there are 3 #8 to choose from and of course I had it set on the wrong one....
Who would have thunk it.

The Mikohn manual under MENU=DISPLAY FONT
Does show a few fonts selections I did not have listed when scrolling through my chamII+ board
I think that might come back to what software ver. you have at U19 location on the Cham board.

Never the less everything is working now and a Big thanks to Ford.

Tim

[FORDSBS]

Tim, After ALL the HELP you gave me I'm happy to help.
Ford