Welcome, Guest. Please login or register.
November 24, 2024, 11:13:31 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  14v DC LED Wedge Bulbs (5 Payline Super Stepper Lights)		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: 14v DC LED Wedge Bulbs (5 Payline Super Stepper Lights)  (Read 7490 times)
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« on: November 22, 2013, 04:55:33 AM »
Hey all,

I just upgreaded my S2k Machine from 2-coin Double Diamond, to 5-line 3x4x5x Double Times Pay and installed the 5 Payline Super Stepper Light!

The 5 Payline Super Stepper Light I purchased has LED bulbs, it's the incandescent sockets, but with LED bulbs installed..

Anyway, 1 if the LED bulbs is burnt out, of the other 4 2 are brighter, while 2 are dull..

So I want to change all 5 to new bulbs so they will all be of the same brightness..

They are 14v DC wedge type bulbs.   They don't have any kind of model #'s on them to reference..

Does anyone know what model # they are? Where to get them?

Thanks!

-TheChad

* led-14-t1_75-w.jpg (18.34 KB, 246x350 - viewed 546 times.)
Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #1 on: November 22, 2013, 12:12:44 PM »
You can use 12v leds with no issues.  If you don't mind suzo/happ mystery charges
http://na.suzohapp.com/all_catalogs/lighting/161-412059

You can also buy any 12 v led from pinball and arcade parts sellers, just make sure that as in your photo, there's ONLY 1 lead on either side of the bulb.  A common mistake on slot application is using the bulbs with both leads on both sides of the bulb, these will cause instant burnt traces and that nasty semiconductor burnt smell, so maker sure you don't do that.
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #2 on: November 22, 2013, 03:48:52 PM »
Quote from: rickhunter on November 22, 2013, 12:12:44 PM
You can use 12v leds with no issues.  If you don't mind suzo/happ mystery charges
http://na.suzohapp.com/all_catalogs/lighting/161-412059

You can also buy any 12 v led from pinball and arcade parts sellers, just make sure that as in your photo, there's ONLY 1 lead on either side of the bulb.  A common mistake on slot application is using the bulbs with both leads on both sides of the bulb, these will cause instant burnt traces and that nasty semiconductor burnt smell, so maker sure you don't do that.


What do you mean suzohapp mystery shipping charges?

I know I've looked at several things from them as they seem to be the only supplier IGT stuff!?   I've thought about ordering LED replacement bulbs for the Fluorescent bulbs..

Thanks,

-TheChad
Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #3 on: November 22, 2013, 04:59:46 PM »
Suzo happ does not show you during or after checkout what the shipping charges will be until after it gets shipped.  So if you just buy the LED's, then you will probably pay around $15 shipping, so unless you have other things to order, they may not be your best options cost wise.
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #4 on: November 23, 2013, 04:39:25 AM »
Okay, well all I can find is 12v, even though the bulb I took out says 14v!?

Anyway, will this work for the button bulbs:

http://na.suzohapp.com/all_catalogs/pushbuttons/91-10WB-123W

Also maybe for the backlit reel lights?

Thanks,

-TheChad
Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #5 on: November 23, 2013, 05:09:11 AM »
yes they will work for the button bulbs, but it looks awful in the reels as the light is too focused so you end up with the dual headlight effect.
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
rjpohl
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 103
Offline Offline

Gender: Male
Posts: 726



WWW
« Reply #6 on: November 23, 2013, 10:30:03 AM »
Most of the slots I get in have the single LED like Part # 161-412059.  they're a littler cheaper too at $2.25 each.
Logged

http://samronslots.com/
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #7 on: November 23, 2013, 02:47:13 PM »
Quote from: rjpohl on November 23, 2013, 10:30:03 AM
Most of the slots I get in have the single LED like Part # 161-412059.  they're a littler cheaper too at $2.25 each.


Those are smaller, they are 1-3/4, not 3-1/4.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #8 on: November 23, 2013, 03:15:40 PM »
http://stores.ebay.com/eshopbuygo
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #9 on: November 25, 2013, 04:36:15 PM »
I was thinking of trying these: http://www.superbrightleds.com/moreinfo/subminiature-bulbs/74-led-bulb-3-smd-led-wide-angle-wedge-base/228/

For the 5-line Stepper panel..

-TheChad
« Last Edit: December 02, 2013, 05:23:14 PM by TheChad » Logged
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #10 on: November 26, 2013, 11:55:04 PM »
Got the new bulb!..

Holy $h*t.

There's no other words.

This little bulb is BRIGHT!

-TheChad

* IMG_1329.JPG (65.57 KB, 490x653 - viewed 249 times.)

* IMG_1331.JPG (38.99 KB, 653x490 - viewed 241 times.)
« Last Edit: November 27, 2013, 08:11:24 PM by TheChad » Logged
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #11 on: December 02, 2013, 03:50:45 PM »
...and the final result!!

p.s. You don't see the "hot spot" effect in person, it shows up on the picture for some reason.

* IMG_1334.JPG (64.52 KB, 490x653 - viewed 258 times.)
« Last Edit: December 02, 2013, 05:22:33 PM by TheChad » Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #12 on: December 02, 2013, 04:47:56 PM »
So where did you get them, and which ones?
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #13 on: December 02, 2013, 05:05:24 PM »
Quote from: rickhunter on December 02, 2013, 04:47:56 PM
So where did you get them, and which ones?


Super Bright LED's
http://www.superbrightleds.com/moreinfo/subminiature-bulbs/74-led-bulb-3-smd-led-wide-angle-wedge-base/228/

"Cool White"

They are $3.50/ea.  So not cheap, but they'll never have to be replaced and they look 100x better!  I also used the same bulb for the denomination light (For single denomination).

I am currently testing lights for buttons as well as reel backlights!

-TheChad
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.086 seconds with 19 queries.