Welcome, Guest. Please login or register.
November 24, 2024, 10:53:43 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  TOP THIS!!! Slot Topper Topic!
| | |-+  My new Garfield topper is alive!		 0 Members and 5 Guests are viewing this topic. « previous next »
Pages: 1 2 3 4 [5] 6 7 8 9 Go Down Print
Author Topic: My new Garfield topper is alive!  (Read 102268 times)
enforcer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 48
Offline Offline

Posts: 109
« Reply #100 on: June 06, 2009, 02:19:04 AM »
Buzz,

Would one of these 12v regulated power supplies that output 12vdc work to power the unit  ?  I am just wondering how many amps and watts should be on the power supply ? And also, how you get all of the wires attached to one positive or negative output on the power supply ?  Obviously, electronics has not been a forte of mine...

http://http://cgi.ebay.com/Radio-Shack-22-504-12VDC-3AMP-Regulated-Power-Supply_W0QQitemZ220424607630QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item335254978e&_trksid=p3286.c0.m14&_trkparms=65%3A15%7C66%3A2%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

Thanks,

enforcer
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #101 on: June 06, 2009, 02:37:00 AM »
I finally got around to wiring my  garfield and getting him up on the wall.  Now I don't know how many people live in earthquake country or on a  CaptainHappy Worried out in the swelling seas but I found this bracket at Lowe's and it does a great job of holding  garfield in place.  Pics attached.  yes Maybe you will like it maybe you won't but thought I would share anyway.  Gotta love the leveling device they give you but I did realize that  garfield is lower on one side than the other so putting the bracket on  garfield was as easy as raising the right side until it was level.  While I was at it I got another one of my toppers cleaned up and running too.  It's Yahtzee.  Today was topper day  bust gut laughing bust gut laughing

* DSCN1689.jpg (76.92 KB, 1024x683 - viewed 351 times.)

* DSCN1679.jpg (115.65 KB, 1024x683 - viewed 360 times.)
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #102 on: June 06, 2009, 02:38:03 AM »
And a coule pictures of the brackets.

* DSCN1678.jpg (73.73 KB, 1024x683 - viewed 352 times.)

* DSCN1677.jpg (71.02 KB, 1024x683 - viewed 334 times.)
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
MrBellMan
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 153
Offline Offline

Gender: Male
Posts: 692


Wild Thing!
« Reply #103 on: June 06, 2009, 02:44:06 AM »
Ashyron,

It appears you have your Garfield Topper  garfield next to your Crystal 7 as I do...  rotflmao

* IMG_2392.JPG (412.74 KB, 1600x1200 - viewed 368 times.)
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #104 on: June 06, 2009, 02:48:11 AM »
Quote from: enforcer on June 06, 2009, 02:19:04 AM
Buzz,

Would one of these 12v regulated power supplies that output 12vdc work to power the unit  ?  I am just wondering how many amps and watts should be on the power supply ? And also, how you get all of the wires attached to one positive or negative output on the power supply ?  Obviously, electronics has not been a forte of mine...

http://cgi.ebay.com/Radio-Shack-22-504-12VDC-3AMP-Regulated-Power-Supply_W0QQitemZ220424607630QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item335254978e&_trksid=p3286.c0.m14&_trkparms=65%3A15%7C66%3A2%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

Thanks,

enforcer


[/quote]

Enforcer, I'm not Buzz but thought I would chime in anyway.  wave  I looked at that link you posted and I would think that would be too big.  I went to Salvation army and bought a used transformer for $1.27 and cut the end off it.  It originally went to a phone charger or something.  I would also think you could get away with something like this:

http://cgi.ebay.com/DC-Power-12-Volt-3Amp-Adapter-LCD-Monitor-for-HP-3A-12V_W0QQitemZ130307229925QQcmdZViewItemQQptZAU_Electronics_Batteries_Chargers?hash=item1e56ea88e5&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A1%7C72%3A1205%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

Som is the guy that took the picture that I posted and he said he checked the amps on it and said that you can get away with 3 amps.  I think mine is 1.5 amps tough.  I don't run any of my machines for too long, maybe a couple hours, so this topper wouldn't be on long either.  I figure if it burns out then I'll just replace it with another one.
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #105 on: June 06, 2009, 03:02:33 AM »
Quote from: sommer on June 05, 2009, 03:43:55 AM
I tested both,?Yes!! they do work with 12vac  rotflmao.lol..i noticed the sign/lighting are not that smooth as dc power? i'll stay with dc power? is better lighting and i probably will try make the chaser led work?*&#$  most people have dc adapter? these topper pull about 1 amp dcv and 1/2 amp in acv.!!(i have good meter)..lol..  Scratch Head frying pan bust gut laughing    
[/quote

enforcer  Does this quote help?   Bunker and I were kicking around trying a old cell phone charger. ( I have a drawer full of them ) I hooked up a 9 volt AC for a short time. it seemed to work OK    You can always tap into 12 V inside your slot machine.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #106 on: June 06, 2009, 11:31:37 AM »
Buzz... wave  A big thanks and K+.  garfield, it must be dinner time because he showed up at my front door.

Ashyron... Thanks for sharing the pic. Going to double check the amp. draw on DCV but with all LED's,the small transformers will be great.       
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #107 on: June 06, 2009, 04:28:34 PM »
Quote from: MrBellMan on June 06, 2009, 02:44:06 AM
Ashyron,

It appears you have your Garfield Topper  garfield next to your Crystal 7 as I do...  rotflmao

MrBellMan, I actually was going to mount  garfield on Crystal but decided it would look better separate.  All my other toppers are separate so  garfield should be too.

Quote from: Railroad94 on June 06, 2009, 11:31:37 AM
Ashyron... Thanks for sharing the pic. Going to double check the amp. draw on DCV but with all LED's,the small transformers will be great.      

Railroad94, I got all my information from Som.  From what I understand there was a bigger amp draw on the 12vdc but the lighting was better on dc.  I didn't notice anything bad on the 12vac power that I am using,  I thought the lights looked fine.  I hope you get your  garfield up and running.  Oh wait,  garfield does run for anything but lasagna.  bust gut laughing bust gut laughing  Remember to show us all a pic.  Tongue Out

Quote from: enforcer on June 06, 2009, 02:19:04 AM
how you get all of the wires attached to one positive or negative output on the power supply ?  Obviously, electronics has not been a forte of mine...
Thanks,
enforcer

Enforcer, were you able to figure out the wiring?  If not, I can take a picture of my wiring job on my  garfield and show you.  Basically I used wire nuts, one for positive and one for negative.  I'd be happy to take  garfield off the wall again and show you some pics.
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #108 on: June 06, 2009, 05:47:53 PM »
Quote from: MrBellMan on June 06, 2009, 02:44:06 AM
Ashyron,

It appears you have your Garfield Topper  garfield next to your Crystal 7 as I do...  rotflmao


Great looking room!!!  Do you know the dimensions of the Garfield ?    I have a great idea that many people on this forum may like.    REALLY LIKE.... more to come.....
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #109 on: June 06, 2009, 06:02:28 PM »
Quote from: jdkmunch on June 06, 2009, 05:47:53 PM
Great looking room!!!  Do you know the dimensions of the Garfield ?

I measured it yesterday and it is roughly 21 inches across by 21 inches high (including the candle) or roughly 16 iches for just  garfield without the candle.  Here is my game room right now.  I have to share it with the washer, dryer, extra fridge and freezer but still all worth it.

* DSCN1694.jpg (85.6 KB, 1024x683 - viewed 352 times.)
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #110 on: June 06, 2009, 06:05:19 PM »
Definitely ... I am scrambling to figure out how I can fit more machines in.  applause

very nice
Logged
slots of fun
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 141


WAS A MEMBER BEFOR WAS LOST IN THE MOVE
« Reply #111 on: June 06, 2009, 07:43:03 PM »
  Hail Hail Hail Hail Thanks " BUZZ " Got my  garfield topper yesterday  applause applause applause applause
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #112 on: June 06, 2009, 07:56:15 PM »
Buzz is a great NLG member!!!
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #113 on: June 06, 2009, 08:02:09 PM »
Quote from: jdkmunch on June 06, 2009, 07:56:15 PM
Buzz is a great NLG member!!!

Wait until you meet him in person.  applause
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #114 on: June 06, 2009, 08:26:54 PM »
Quote from: ashyron on June 06, 2009, 08:02:09 PM
Quote from: jdkmunch on June 06, 2009, 07:56:15 PM
Buzz is a great NLG member!!!

Wait until you meet him in person.  applause

Oh, there are so many responses that I could insert here! Tongue Out  Evil Evil
Are you deliberately trying to play straight man to set up my jokes? bust gut laughing bust gut laughing bust gut laughing bust gut laughing
I'll lay off and just say that Buzz is a great guy. propeller
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #115 on: June 06, 2009, 11:51:52 PM »
I agree that Buzz is a great guy!!
Logged
enforcer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 48
Offline Offline

Posts: 109
« Reply #116 on: June 07, 2009, 01:45:10 AM »
ashyron,

I would appreciate some more pics of the wiring job of the  garfield  for sure, if you can manage it.  Many thanks,

enforcer
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #117 on: June 07, 2009, 02:48:01 AM »
Quote from: enforcer on June 07, 2009, 01:45:10 AM
ashyron,

I would appreciate some more pics of the wiring job of the  garfield  for sure, if you can manage it.  Many thanks,

enforcer

I'll try to get some posted before going to bed tonight.  I still have a couple things to do around here but I'll get  garfield taken down and some wirin pics taken. Tongue Out
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
sommer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 60
Offline Offline

Gender: Male
Posts: 151
« Reply #118 on: June 07, 2009, 03:59:55 AM »
Yes!! Hail applause buzz..a great guy.!!thanks!! Hail

Quote from: ashyron on June 07, 2009, 02:48:01 AM
Quote from: enforcer on June 07, 2009, 01:45:10 AM
ashyron,

I would appreciate some more pics of the wiring job of the  garfield  for sure, if you can manage it.  Many thanks,

enforcer

I'll try to get some posted before going to bed tonight.  I still have a couple things to do around here but I'll get  garfield taken down and some wirin pics taken. Tongue Out
wiring work?hope this help? i recmmd used 12v~13v output 1amp or higher.!! Tongue Out

* garf.JPG (199.16 KB, 1600x1200 - viewed 391 times.)
Logged
IGT S-2000...
Sorry about my grammar..lol..it is my second language.!!lmao...
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #119 on: June 07, 2009, 04:38:23 AM »
Quote from: enforcer on June 07, 2009, 01:45:10 AM
ashyron,

I would appreciate some more pics of the wiring job of the  garfield  for sure, if you can manage it.  Many thanks,

enforcer

Enforcer, I didn't know how detailed you wanted me to get so I got as detailed as I could.  There are a few pictures I will be uploading.  I hope you can read it all.

* DSCN1708.jpg (39.13 KB, 512x768 - viewed 372 times.)

* DSCN1701.jpg (46.2 KB, 1024x683 - viewed 363 times.)
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #120 on: June 07, 2009, 04:40:05 AM »
another pic.

* DSCN1702.jpg (44.99 KB, 1024x683 - viewed 355 times.)
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #121 on: June 07, 2009, 04:42:19 AM »
The positive and negative wires.

* DSCN1703.jpg (69.49 KB, 1024x683 - viewed 383 times.)

* DSCN1704.jpg (66.16 KB, 1024x683 - viewed 347 times.)
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #122 on: June 07, 2009, 04:48:44 AM »
All connected. 

And on a side note, you shouldn't have to take your garfield apart.  I had to because I had it all wired already and I had already made a plastic bracket to cover the whole on the bottom. 

Lemme know if you need more help and I'll try to help more.

* DSCN1705.jpg (50.71 KB, 1024x683 - viewed 345 times.)

* DSCN1707.jpg (40.25 KB, 1024x683 - viewed 347 times.)
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
enforcer
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 48
Offline Offline

Posts: 109
« Reply #123 on: June 07, 2009, 10:41:54 PM »
Ashyron,

What can I say, but 1,000 thank-you's !!  applause applause applause applause

Your time taken in writing out these detailed instructions, taking the pictures and then posting them gives new meaning to "above and beyond" !!

Your karma is going up and I am making an additional contribution to the forum as an expression of my gratitutde.

 Hail Hail Hail Hail Hail

enforcer
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #124 on: June 07, 2009, 11:17:53 PM »
Great Details Ashyron!!!! Kudo's plus!! applause
Logged
Pages: 1 2 3 4 [5] 6 7 8 9 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.123 seconds with 20 queries.