S-2000 Multi-Denom setup

[Foster]

Ron,
Glad I could help you out.

[stayouttadabunker]

Great JOB FOSTER!!!!

Was it just the "set each player" settings in the options?

[Brianzz]

Ron since you can't get it working I'm sure you're so tired of trying you just want to give it away, PM me for my shipping address, I'll take it off your hands for you

IT IS WORKING! Thanks to Foster expertise. So I won't need your address.

Ron (r273)

DAMNIT!

[stayouttadabunker]

 

[Ron (r273)]

Ron,
Glad I could help you out.

For whose who are dieing to know what fixed it, I am not going to tell.

Just kidding. All my setting were correct. We unhooked the J15 connection and shorted out the coin in and the ground.
It showed C-51 and flashed back to the original amount, over and over. I turned the power off to the CHAMMII+ and it
reset itself. Hook the J15 connection back, and it worked.

I would guess it was my twisted wire connection (instead of soldering it) to the J15 plug that was at fault. All had worked
before the select credit value button was installed. Who would have guessed it would be a connection?


Ron (r273)

[Ron (r273)]

Ron,
Glad I could help you out.

I want to publicly thank Foster for his phone help. I had been been working off and on trying to
fix this for several months. I had used the key chip to change/look at  the settings at least 20 times.
Read and reread the posts about it until I was about to give up. Out of the many talented people here,
Foster stepped up to the plate and offered to help me. I thank him very much. He is a good man in my book.

Ron (r273)

You can paypal me any time for the endorsement.

[stayouttadabunker]

Wait! What was that fine print? 

[Railroad94]

hahahahahahahah      

[CaptainHappy]

Wait! What was that fine print? 

I don't know I never read the fine print! 

CH

[morspeed]

Got a question..... Are all the 6-6-3 meters set up with the connection for multi denom panels?
Tommy

[paul]

Is a game 597 done the same way it takes a 31 to set   paul

[Railroad94]

If 597 and your base supports multi-denom  then I believe it should be done the same way.

[IFFV68]

Foster is the man.
A very smart, & one of the nicest guys around.
I would also like to thank Foster & others for their help. I can't say enough good things..
Richard

[Foster]

Got a question..... Are all the 6-6-3 meters set up with the connection for multi denom panels?
Tommy

Yes

[kindgaming]

hello friends I have problem with the auxiliary button programmed everything but the button does not work could someone please help me

[BR549 Auto Sales]

was your machine set up for the touch pad panel for multi denom at one point?

[kindgaming]

if everything works with the control panel but I have 5 machines only one has the control panel so I put the button but does not work
            Player # 1 $ 0.25
            Player # 2 $ 0.50
            Player # 3 $ 1.00
            Player # 4 $ 2.00

 7.1.2 Game Selection (All read $ 0.25 at top of Each game #)
          Game # 1: (90.50%)
          Game # 2 (90.01%)
          Game # 3: (92.01%)
          Game # 4: (92.01%)
7.1.1.4  1 button player1
           2 button player2       3 button player3     4button player4

[kindgaming]

if everything works with the touch pad panel but I have 5 machines only one has the touch pad panel so I put the button but does not work
            Player # 1 $ 0.25
            Player # 2 $ 0.50
            Player # 3 $ 1.00
            Player # 4 $ 2.00

 7.1.2 Game Selection (All read $ 0.25 at top of Each game #)
          Game # 1: (90.50%)
          Game # 2 (90.01%)
          Game # 3: (92.01%)
          Game # 4: (92.01%)
         
 7.1.1.4  1 button player1                        3 button player3     
             2 button player2                        4button player4

[Foster]

Do you have 5 5 2 displays or 6 6 3 displays?
5 5 2 means the display has 5 digits each for Winner Paid, Credits and 2 digits for Credits/coins Played.
6 6 3 means the display has 6 digits each for Winner Paid, Credits and 3 digits for Credits/coins Played.

IF the player display is a 6 6 3 display to use multi-denom you have to have the touch pad and LED box behind the reel glass.
The player button on the deck will not function with a 6 6 3 display.


The reason is the touch pad controller logic is part of the 6 6 3 display board.

IF you have the touch pads and they act like they are not functioning try moving the wiring between the touch pad on the glass and the LED box.
 

[kindgaming]

if it shows me 6 6 3 but with the control works fine but when I use the auxiliary button does not work the button on the side of the bill acceptor

[Foster]

IF you have the 6 6 3 you can not add a button to the player deck that would be used to select the credit value.
The machine will not let you since it detects the the touch pad controller hardware that is part of he 6 6 3 board.

[kindgaming]

I have 5 machines only one I could get the touch pad panel but want to work with the connect button and set the display 6 6 3 me but I could work please help me is a problem please

[Foster]

You have to get the touch pad parts for the machines without them if they have the 6 6 3 display it will not work any other way.
The other option is to change the 6 6 3 to 5 5 2 then you can use the player button on the deck.
 
You can not substitute the button for the touch pad on any machine with the 6 6 3.

 

[kindgaming]

muchas gracias karma boy a probar

[kindgaming]

karma boy thank you very much to prove