Welcome, Guest. Please login or register.
November 24, 2024, 10:10:12 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  WMS Reel Games. (Moderator: knagl)
| | |-+  Jackpot Party not coming up		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Jackpot Party not coming up  (Read 11572 times)
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« on: June 25, 2009, 04:29:07 PM »
Hey there,

I've got a party coming up this weekend, and my Jackpot Party slot is not coming up.  When I turn on the power, the fluorescent bulbs light, the dot matrix display comes up and says "Williams", but that is about it.  The reels do not initialize, the LED's do not come on, and none of the panel buttons light.

I'm hoping it may be a fuse, but I do not know where they are!!   Help

Can someone help me out, and let me know what I should be looking for, in order to get my game running again?

Thanks,
Rob
Logged
---
Rob Rosenhouse
Verona, NJ
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #1 on: June 25, 2009, 04:48:28 PM »
It's just not a party without Jackpot Party !!!  propeller

Could your bottom box power supply be shot?  You say the flourescent comes on, is it only the top box one that comes on or is you belly coming on also?  There is a seperate power supply for the top box is why I ask.  When was the last time you had it turned on?
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #2 on: June 25, 2009, 04:51:53 PM »
Quote from: archjds on June 25, 2009, 04:48:28 PM
It's just not a party without Jackpot Party !!!  propeller

Could your bottom box power supply be shot?  You say the flourescent comes on, is it only the top box one that comes on or is you belly coming on also?  There is a seperate power supply for the top box is why I ask.  When was the last time you had it turned on?

The top and belly come on.  It seems like the computer portion is not getting all it's power.  The reels are free spinning, as if the power is off.  I reseated all of the connectors I could find, pulled the two pc boards out and reseated them as well.

Gotta get this Party started.....

Rob
Logged
---
Rob Rosenhouse
Verona, NJ
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #3 on: June 25, 2009, 05:01:27 PM »
Sounds like the power supply if all your connections look good to you.  Might wait for one of the pros to chirp in before you go on a search for a new one.  I had a similar issue recently on a S2000 where the I was geting NetPlex failures and even though the supply worked for some components, it was not working for everything.  Changing it out fixed the problem.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #4 on: June 25, 2009, 05:03:06 PM »
Rob before you go to far check the battery on the MPU board. Most likely not the problem but the easyest thing to check. and  (makes you think you did something )
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #5 on: June 25, 2009, 05:15:50 PM »
I just sent a PM to JDMunch.  He just had a battery go out on his dot...so will find out exactly what the symptoms were.
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #6 on: June 25, 2009, 05:37:07 PM »
Hi!   -
When my battery went out I turned on the machine and the display showed "Batt lo".    I replaced the battery and was up in minutes.  I would suggest if you have a clear chip that you check the voltage on the battery.  If you can't then take the battery out and turn on the machine.  If it is only the battery the machine should display "batt lo" for you.   If you still get no error  - then it sounds like the power supply.   
Logged
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #7 on: June 25, 2009, 05:44:37 PM »
Quote from: Buzz on June 25, 2009, 05:03:06 PM
Rob before you go to far check the battery on the MPU board. Most likely not the problem but the easyest thing to check. and  (makes you think you did something )

Checked the battery just now.  3.6 volts.  Not it, but thank you for the suggestions.

If there are not individual fuses to be checked, my bet is something failed on the lower power supply.

However, I have no idea what I am doing, so I am open to suggestions....   Scratch Head
Logged
---
Rob Rosenhouse
Verona, NJ
cfh
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 113
Offline Offline

Posts: 458



WWW
« Reply #8 on: June 25, 2009, 06:45:34 PM »
on the slot I/O board are ALL five of the LEDs on?
if one or more are out, you have a lower power supply
problem. It's not the battery. you would get a message
if the battery was bad and the game was booting.

if all five LEDs are on, is the FAIL led at the left on?
Logged
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #9 on: June 26, 2009, 09:22:57 AM »
Quote from: cfh on June 25, 2009, 06:45:34 PM
on the slot I/O board are ALL five of the LEDs on?
if one or more are out, you have a lower power supply
problem. It's not the battery. you would get a message
if the battery was bad and the game was booting.

if all five LEDs are on, is the FAIL led at the left on?




Clay,

I seem to be missing the +12V, -12V, and +5V voltages.  I suspected that it would end up being the power supply.

So, I guess I need to replace the power supply.  Anyone selling a replacement or rebuilt one?

Rob
Logged
---
Rob Rosenhouse
Verona, NJ
tacman
NLG Document, Media Gallery and FAQ Writer
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #10 on: June 26, 2009, 09:37:14 AM »
Rob, the WMS power supplies are notorious for failures. If you are going to replace your current supply, I would suggest you look at the computer power supply mod that other NLG members and most recently Clfh have documented on this forum.

 Dan (tacman)
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #11 on: June 26, 2009, 11:36:21 AM »
Rob  go to powersupplydepot.com  I don't know if they have the power suooly you need. they have the upper one for the dot display, $19.95 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #12 on: June 26, 2009, 02:41:18 PM »
Quote from: Buzz on June 26, 2009, 11:36:21 AM
Rob  go to powersupplydepot.com  I don't know if they have the power suooly you need. they have the upper one for the dot display, $19.95 

Buzz, were you able to find any part numbers for this power supply on your game??  I haven't looked at mine yet.  If you haven't looked maybe I can the next time I come over.  I might need one too. yes
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #13 on: June 26, 2009, 05:07:15 PM »
Rob, as Ashyron has already suggested in his post, you will need the part number off of the bottom PS in order to search for it on the site that Buzz mentioned. It would be difficult to simply navigate the site looking for it.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
PinballWiz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 37
Offline Offline

Gender: Male
Posts: 46


If I'm not home, I'm at The Borgata
« Reply #14 on: June 26, 2009, 05:36:37 PM »
Quote from: StatFreak on June 26, 2009, 05:07:15 PM
Rob, as Ashyron has already suggested in his post, you will need the part number off of the bottom PS in order to search for it on the site that Buzz mentioned. It would be difficult to simply navigate the site looking for it.

As luck would have it, I had brand new lower power supply.  Talk about pulling a rabbit out of a hat.  All is working now.  The game did go thru some weird stuff when it first powered on.  I think that is because I pulled the battery during troubleshooting.  But to my delight, it is back to working 100%.  The BV still worked, and all seems to be the same as it was before it went down.

Thank you all for your help and suggestions.  Jackpot Party can again, be the life of the party!!  applause

Rob
Logged
---
Rob Rosenhouse
Verona, NJ
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #15 on: June 26, 2009, 11:17:51 PM »
Quote from: PinballWiz on June 26, 2009, 05:36:37 PM
Quote from: StatFreak on June 26, 2009, 05:07:15 PM
Rob, as Ashyron has already suggested in his post, you will need the part number off of the bottom PS in order to search for it on the site that Buzz mentioned. It would be difficult to simply navigate the site looking for it.

As luck would have it, I had brand new lower power supply.  Talk about pulling a rabbit out of a hat.  All is working now.  The game did go thru some weird stuff when it first powered on.  I think that is because I pulled the battery during troubleshooting.  But to my delight, it is back to working 100%.  The BV still worked, and all seems to be the same as it was before it went down.

Thank you all for your help and suggestions.  Jackpot Party can again, be the life of the party!!  applause

Rob


That's great Rob.  Can I ask a favor Scratch Head  and ask if you can look at the old power supply and post the  part number?  I would hate to tear a good working machine apart just to look for a number.  If not, that's cool too, but very happy to hear you got it up and running again.
 yes
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
cfh
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 113
Offline Offline

Posts: 458



WWW
« Reply #16 on: June 27, 2009, 11:13:44 AM »
You're wasting your time and money on buying an new lower power supply.
i highly suggest you take this approach:
http://newlifegames.net/nlg/index.php?topic=346.0
Logged
jdkmunch
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 624
Offline Offline

Gender: Male
Posts: 2640
« Reply #17 on: June 27, 2009, 11:17:35 AM »
When you started it up did is light up Poof or something?  That's what mine did.

 applause applause applause applause

I'm glad you got it going applause
Logged
ekiernan
Guest
« Reply #18 on: March 13, 2010, 10:30:54 PM »
Quote from: cfh on June 27, 2009, 11:13:44 AM
You're wasting your time and money on buying an new lower power supply.
i highly suggest you take this approach:
http://newlifegames.net/nlg/index.php?topic=346.0

Quote from: cfh on June 27, 2009, 11:13:44 AM
You're wasting your time and money on buying an new lower power supply.
i highly suggest you take this approach:
http://newlifegames.net/nlg/index.php?topic=346.0



Thanks so much for this link!  I had the same failure.  Same Jackpot Party.  Same symptoms.  Dropped in the ATX power supply and BINGO!  This information saved me lots of hassle and likely money.  I am putting the money I think I saved toward the NLG site.

I am so grateful for all of your comments and you guys taking the time to share your experiences.

I did have one question though.  I noticed that the Orange/Red wire was noted to test at +5V.  I had 0 volts after following the instructions.  So, I tried grabbing another +5V (red - pin 4) from the ATX supply to feed this Orange/Red wire.  As it turned out, I did not need this +5V feed as it describes to test toward the end of the intructions.  The machine seems to work fine without this +5V. 

I was just wondering what that +5V on the Orange/Red is supposed to do. 

Thanks again and I would recommend this to anyone who finds themselves in the same predicament!
Logged
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« Reply #19 on: March 13, 2010, 10:55:48 PM »
Quote from: Buzz on June 26, 2009, 11:36:21 AM
Rob  go to powersupplydepot.com  I don't know if they have the power suooly you need. they have the upper one for the dot display, $19.95 

Same manufacture...just change the last digits to -31 for the lower supply....
It will plug right in......

Kirk
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.09 seconds with 20 queries.