bv was working now its not

[coxwho1]

i recently bought a few igt slots in a police auction having problems with a few of them i will start with the black tie the bv was working now its not done some research bought a clear prom and a set prom went thru the series with same results bv not working i know it worked before i played machine it has no coin operator in it so this is the only way to play have a black jack the same way can someone help with this problem

[stayouttadabunker]

In the test switch options...did you set your machine for your preferred coin denomination?

[coxwho1]

yes i did set it for 25 cents thank you for reply

[stayouttadabunker]

Hey coxwho1,
This machine...the Black Tie game....is it an S+ or is it a S2000?
Can you see what kind of DBV is in it?
If you post the numbers that are on it and maybe a pic or two...
there will be some members that'll be able to help ya!

[a69mopar]

If it has a dbv200 or dbv145, the transport has to be inserted fully.  Sometimes the back small tabs don't go into the notches.  It would make sound though if this was the issue.  Do you hear the BV cycle upon start up?

Thanks,
Wayne

[coxwho1]

dont know how to tell s+ from s2000 black tie model# is b4936cfiw black jack is b5036ciw bvd in black tie is 145 black jack is 200 are there different clear\set chips for different models of igt tried to att pic tells me file to large by the way u guys are super!!!! thanks for help

[a69mopar]

above is an S2000



Below is an S-Plus


Yours would be an S-Plus

[coxwho1]

i dont see what the difference is what tells one from the other

[zarobhr]

main thing is the dotmation display on the left.

[Ron (r273)]

i dont see what the difference is what tells one from the other

Also are the speaker "ears" along with the small blue screen (Dotmation display) on the bottom left of the reel glass, that is the S-2000.

[fanninislots]

I would do a deep ram clear with a test 123. does the BV cycle when its turned on? Ben

[coxwho1]

yes it does cycle how do you perform a deep ram clear 123

[fanninislots]

it takes a test 123 chip and it clears the 4 square chip on the mother board. it sounds like you need one, I have them in stock its $20.00 plus shipping of $6.00. Ben

[coxwho1]

if you believe this will fix it ill take it let me know how to pay

[fanninislots]

just give me a call 928-768-3113. Ben

[Op-Bell]

i dont see what the difference is what tells one from the other

They don't all have speaker ears. I think the dot display may be optional as well. But I believe the bill acceptor bezel is always convex curved on the S2000, and flat on the S+.

[lemans1969]

How many credits are on the machine? You have a bill validator credit limit and once you go over your limit the bv will turn off until you come back down below your credit limit. Also on the older style bill validators that you have- DBV 145 and DBV 200- your power supply may be weak. With a weak supply, it will cycle and light up, but not take any bills. April