Welcome, Guest. Please login or register.
November 21, 2024, 08:26:25 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Bill Validators and Currency acceptors
| |-+  JCM DBV-45, DBV-145, and DBV-200 Bill Validators.
| | |-+  Bally s5500 DBV 200 Stops Working		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally s5500 DBV 200 Stops Working  (Read 5407 times)
TTJACKPOT
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 102
« on: October 12, 2009, 02:43:47 PM »
I have a Bally s5500 machine which has a peculiar problem--every once in a while the DBV200 just stops working (no light-won't take any bills)--If I do a reset it sometimes will come back up and work just fine. However the reset does not always solve the issue--sometimes I have to do a complete safe ram clear--and then it will work (will work fine for a few weeks then it will shut down) new. Everything seems to be fine--the DBV has the new chip for the Bally--all wiring looks OK. It almost sounds like there may be a memory issue that stops the DBV from working--anyway if anyone has a clue as to why this occurs--I would greatly appreciate it--Thanks: John
Logged
JCM Tech
New NLG Member 1 to 100 Post
**

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 44
« Reply #1 on: October 14, 2009, 01:39:37 PM »
Back when I worked at the Fiesta in North Las Vegas, we had this issue. Turned out to be the DUART chip on the mother board. Seems it doesn't like hot swapping components. Causes voltage spikes that do internal damage. This causes intermittent signal loss. What happens is the vend valid signal to the host or the ACK reply to the validator gets missed. If the host doesn't see the vend valid, you get no credits. If the validator doesn't get the ACK it doesn't reset for the next bill.
When it goes "To sleep" try opening and closing the door. This will force a reset on the validator and if it comes up, the DUART is the culprit. Can't remember which socket it is, but it's on the right hand rear of the MB
Logged
TTJACKPOT
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 102
« Reply #2 on: October 14, 2009, 03:35:05 PM »
Thanks for the reply--I will try that the next time it wants to go to sleep---I have anothe MB set up I may try that for a while also. Thanks again John
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.101 seconds with 19 queries.