E-1088 Reels Spin

[jasontschetter]

A puzzle (hopefully a simple one) for the E-series experts...

I have a E-1088 that was working perfectly until we moved it (removed the hopper and reels, moved the unit, and reinserted hopper and reels).  Symptoms are:
* insert coin - diverter does not send to hopper, just drops out the reject
* manually tripping coin acceptor - Registers Coin Inserted correctly showing me that basic I/O is working...
* Reels are spinning free, all reel mechanics appear to be working fine, I can hit the release, pull the arm and they spin, but they never lock
* Reel solenoids can be released manually and engage properly, but they never seem to engage automatically
* If I manually activate the reels with the machine on I will eventually get a 41 000 indicating a detected improper reel spin

I'm assuming that I need to reset the logic to recognize the reel position, but do not know how and am stuck.  Any suggestions would be appreciated.

Would one of you please post an E-1000 manual?  I have not been able to find one in the Submitted Files.

Many thanks!
Jason

Let me know if anyone needs anything on any of the following:
Bally EM 955 (Works like a champ!)
Bally V- 1252 (Resurrected from the ashes!)
Bally E-1088 (Soon to be working!)

[FOXSSLOTS1]

when you say the coins "DROP TO THE REJECT" do you mean they come back to you in the tray?  do you have any coil activitiy - does the handle release when you manually activate the coin switch (you said manually tripping coin acceptor?)?   run the 2 test - do any of the coils activate (coin divertor - handle release - reel coils) - if no coils - you have lost the 50v - check your 8amp fuse and the delay relay.

 

[jasontschetter]

Sorry for the delay, busy couple of weeks.

First off, thank you for the tip, you were spot-on, it was the 8A fuse for the 50v circuit.  I wasn't able to find a direct equivalent, but on closer inspection, the fuse that was in that circuit was a 3A 32v and the much lower wattage explains why it blew.  We were able to put in a 5A 32v from RadioShack and we're back up and running (but expect it to blow if anything sticks).

Many thanks!
Jason