Welcome, Guest. Please login or register.
June 27, 2024, 11:41:44 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  WMS Jackpot Stampede Model 400 Power Supply		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: WMS Jackpot Stampede Model 400 Power Supply  (Read 4998 times)
corndog
New NLG Member 1 to 100 Post
**

Total Karma Storms: 6
Offline Offline

Posts: 31
« on: December 24, 2009, 01:37:54 PM »
Thanks to Joey at NLG, I now have a working slots.
The machine was given to me broken, previous owner stated it powered up, but did not initialize.
 The PDU was sent away and replaced the bottom board, PDU was reinstalled with same problem.
Symptoms:. Powered up, no LED's in players window. All power LED's on I/O card on, DS1 error light off.
No readout on CPU 7 segment led display.

Joey said to replace C5 (I think, 47ufd cap on lower PS board) with a higher voltage, same ufd.

PRESTO!!!!  Machine up and running perfectly.

Obviously, there are still bad power boards out there.

Thanks JOEY!!!!

Kevin
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #1 on: December 24, 2009, 03:05:24 PM »
Thanks for posting Kevin, and welcome to NLG!!  wave

I'm glad to hear that Joey got you up and running. applause applause

StatFreak garfield
nlg  Global Moderator
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« Reply #2 on: December 24, 2009, 03:39:08 PM »
The 400/401/40S5 series power supplies are usually bulletproof. The * PRIMARY* failure is filter caps. You can tell when it's going to fail, the lamps will have a telltale "Flicker" especially when the supply is cold.
Unless its a "fire job" replacing the electrolytic caps will bring htem back to life.
When you pull one of these, SHOTGUN the caps! if your in there replacing one, do them all...they are inexpensive. Your time is more costly...
If you DO need a topbox power supply for a Dotmation you will find them at www.mpja.com  look up the 12 volt single 9 amp supply.
Look at the picture and then the numbers on your failed unit. You will find it's an **** EXACT **** replacement! Cost? $19.95



Kirk
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
Forrhouse
Manufacturing Equipment & Parts to Keep Slots that are No Longer Supported by the Manufacturer running.
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 252
Offline Offline

Gender: Male
Posts: 532


Life is too short, live, love and have a good time
« Reply #3 on: December 25, 2009, 08:22:10 AM »
I have found a much better replacement supply for the Dotmation power supply.  It is 12volt 15 amps and has a built in fan.  This is more amperage than you need, but the machine will only use what it needs.  The Williams dotmation power supplies don't have enough juice and suffer from excessive heat which makes them blow.  The only downside to my power supply is that it is an inch to big to fit in the dotmation screen's metal  box.   The pluses are that my power supply replacements are very stable and hook into the existing wiring with the addition of a few spade connectors.  I sell them for $35ea plus shipping.

Eric
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.152 seconds with 19 queries.