BONUS SIZZLING 7s IN A S-2000

[Slottex]

Has anyone installed a Bonus Sizzling 7s in a S-2000 using a SB-1000 ? I found a 9" kit that came out of an S-2000 but no chips with it !
 
THANKS DANNY

[stayouttadabunker]

Danny,
Does it have the bonus light up in the award glass?
Can you give me a picture of the award glass.

[Slottex]

Bunk, My camera is broke but it is the Bonus Sizzlin 7s with the light bar 9" ,came out of a S-2000. I put the SB-1000 and SS 7090 in the game and keep getting an ERROR on the SS chip. Using a 27C64 120ns chip on the SS !

THANKS FOR ANY HELP

[stayouttadabunker]

I'm using 70ns on my SB chip and 100ns on the SS chip.
I'm almost certain that your 120ns SS chip is too slow.
Take out the DSV sound card for now and make sure
 you have SG000363 GME 1 & 2 chips in their normal sockets.

[Slottex]

I changed to 27C64 100ns took out the sound card and no change, I get (SYSTEM ERROR) & (SS EPROM INVALID OxF011 ).
Running- SB001000, SG000363 Games and VSO11GX1 VERSION .

HELP !!!

[stayouttadabunker]

I changed to 27C64 100ns took out the sound card and no change, I get (SYSTEM ERROR) & (SS EPROM INVALID OxF011 ).
Running- SB001000, SG000363 Games and VSO11GX1 VERSION .

HELP !!!

That's when you keep turning the reset key until you get the message
to hold the test button "for 2-3 seconds" then close the door.

[Slottex]

Bunk, I  turned the key , pushed the button and closed the door till i was tired , Thats the reason i posted on here the Door Hinges needed a break. I don't know what I am doing wrong !

[a69mopar]

Hi Danny,   Which end of the socket do you have the ss chip installed?  towards the notch with the empty pin slots at the opposite end?

Thanks,
Wayne

[Slottex]

HEY WAYNE , EVERYTHING IS INSTALLED CORRECTLY, I DON'T KNOW IF ANYBODY HAS PUT ONE IN A S-2000 . JUST NOT SURE IF THE SB1000 & GME 363 IS GOING TO SUPPORT TYPE-25. NEED TO DOUBLE CHECK MY SS CHIPS IN A S+ ! HOW'S THINGS IN CANADA ?

THANKS DANNY

[stayouttadabunker]

I just spent an hour trying to get an SS7090 to work in an S2000.
No love I'm afraid  I keep getting "mis-match crc" or "ram" error or some other error -
even when I threw in different base chips and SG chips such as 127 or 155.
I cannot get the Type 25 SS7090 to work with anything.

You need some type of S2000 PSR that utilizes "Type 25" chips as far as I can see.
Maybe the S2000 experts have something for you.
Or  place an ad in the "Classsifieds" section of NLG with your want for an S2000 software?

[a69mopar]

Sg000175, sg000194, sg000200, and sgl00386 all work for type 25. I believe they call for vfd VFD00007.

Thanks,
Wayne
Hi Danny, It's bitter cold up here, but that didn't stop me from building a crate outside today.  In a few hours my toes should thaw out.  The next few days will be extremely busy, but I'll look to see what more I have on this when I can.

Thanks,
Wayne

[Slottex]

Thanks for the help guys, I hope this can be solved. I think the correct SB is SB100024, chances of finding it ??????

Thank's Danny

[a69mopar]

Not sure if your game chip is compatible

W
Cell

[blueridgeslots]

Thanks for the help guys, I hope this can be solved. I think the correct SB is SB100024, chances of finding it ??????

Thank's Danny

That may be one of them, but I know SB100021 is another, I know a place that has that one on their list of SB's available, but they are not "Good ol Boys" they are businessmen and say don't call to talk just to buy, but they do have it if all else fails

[a69mopar]

as Jim said, the SG000363 is good for type 25.

Thanks,
Wayne

[Slottex]

Jim, PM sent ! Thanks

[blueridgeslots]

Well, if we can get a few more people I think we can make it happen

[Slottex]

WELL YOU KNOW I AM IN !!!!!!!!!!

[Slottex]

I got the SB 100021 and the game works perfect !!! Thanks Blueridge Slots !!!!!!!!!!!!!

[knagl]

Danny-

I don't have an S2000 -- is there the same harness in the top box as there is on an S+ to attach the light bar assembly?  Is the sound the same (ie. the siren when you get three red 7s)?

Also, for documentation sake, you're using the SB100021 and what other chip(s) (I'm not familiar with what chips an S2000 uses)?

[Slottex]

Kevin, It has a Molex 12 pin male and female which the S-2000 uses the female, I am running a DSV00042 which it plays neat music on the 3 red sevens , I should be getting the DSV 00015 in the next few days which is what the game calls for. I pulled the game out of my sales and moved it to my gameroom, its a game i always play when i go to Coonass Land !!!!!!

THANKS

[Slottex]

Kevin, Sorry I missed part of your question , running GME SG000363 & Version VSO11GX1 .

[stayouttadabunker]

I'll betcha the DSV 15 sound card is pretty cool for that game...
Danny, make a video so we can hear it!

[knagl]

Thanks and K+ for the info, Danny and Jim (Blueridge).  I added it to the S+ BS7s thread as there isn't much documentation about this game at all -- at least I have it all in one place there.

[OhioGaming]

Where is the connection for the 12 pin female at?