Welcome, Guest. Please login or register.
March 28, 2024, 07:23:53 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Error codes on Bally 6000
0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Error codes on Bally 6000  (Read 45040 times)
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« on: April 29, 2010, 02:09:23 AM »

Hello everyone, I'm having a problem with my Triple Bonus Frenzy machine.
When I turn it on, You hear the guys voice " Copyright bally gaming inc all rights reserved" , Then all  the button lights
start flashing, and thats all it will do, And it shows the numbers 8178 in the win paid window.
So I press the reset button, and the number goes to 8179. I press it again and then it goes to 817a, Press it again 817b, press it again 817d,
press it again 817e. I press the reset button one more time, The display goes back to normal, the reels spin up, Shut the door and then it plays normal.

Just curious if anyone could tell me what would be causing this? 

Thanks everyone!  Jim....
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens


« Reply #1 on: April 29, 2010, 02:15:45 AM »

The only thing that I could think of is that you are stuck in the "menus" on startup. See if the battery on the mpu is low and replace it, then see if the board is seated properly. If you have the knowledge, do a full clear also. And also check that the reset switch (white button) is not stuck in the closed position.
Logged

** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #2 on: April 29, 2010, 02:37:14 AM »

I was thinking maybe the battery also. The machine has been working fine. This just started yesterday.
I am familure with changing the battery on the igt S+ and PE + machines.  I will have to read up on the bally
Thanks for the reply!  Jim  wave
The only thing that I could think of is that you are stuck in the "menus" on startup. See if the battery on the mpu is low and replace it, then see if the board is seated properly. If you have the knowledge, do a full clear also. And also check that the reset switch (white button) is not stuck in the closed position.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #3 on: April 29, 2010, 09:58:38 PM »

81xx is the error code for a low battery.  You will need to replace the battery then perform a complete saferam clear on the machine.

I put a list of codes below.

Thanks,
Wayne




Code Description Definition
20 Coin In Jam The optics on the coin optic decoder board have been blocked for
too long.
21 Inappropriate Coin In A coin has been accepted by the machine after the maximum
number of extra coins wagered have been registered. Extra coins up
to the maximum (currently 15) are paid from the hopper upon
completion of the game.
22 Invalid Coin A coin has passed the coin optics during a reel spin.
23 Coin Not Sensed Coin was not sensed by the drop optic (DS2-8=OFF Diverter Optic
Installed)
24 Coin Reverse A coin was sensed traveling from bottom to top of the optic block.
50-26 Bill Paused A bill was detained from entering the bill acceptor stacker within the
normal time.
50-27 Bill Jam A bill was prevented from entering the stacker.
50-29 Bill Acceptor Communication
Error
Communication between the bill acceptor and the machine has
failed.
30 Hopper Overpay More coins than expected have been sensed by the hopper's
coin-out optic during a payout.
31 Hopper Coin-Out Jam The hopper's coin-out optic has been blocked too long (see
Troubleshooting, Hopper LED Error Codes).
32 Hopper Empty The hopper circuitry has run in forward direction for longer than 15
seconds with no coins sensed by the coin-out optic.
33 Reset During Payout A system reset has occurred while the hopper was running.
5x-36 Printer Failure General Printer Failure
5x-37 Printer Jammed The printer is jammed at the platen.
5x-38 Printer Empty The printer is out of paper
5x-39 Printer Low3 The paper sensor has detected a low paper condition.
40 Reel Initialization Error The reels were unable to complete initialization after a system reset.
41 Reel #1 Improper Spin The reel did not spin to the expected position.
42 Reel #2 Improper Spin The reel did not spin to the expected position.
43 Reel #3 Improper Spin The reel did not spin to the expected position.
44 Reel #4 Improper Spin The reel did not spin to the expected position.
45 Reel #5 Improper Spin The reel did not spin to the expected position.
50 Slot Door Open The main door switch senses the door is open.
51 Belly Door Open The belly door switch senses the door is open.
52 Bill Acceptor Stacker Access The stacker access switch senses the door is open.
53 Lower Door Open (Slant) The lower door switch senses the door is open.
54 Drop Door Open The drop door switch senses the door is open.
55 Bill Acceptor Stacker
Removed
Signal received from the bill acceptor that there is no stacker.
56 Logic Door Access The MPU board is removed or not seated correctly.
57 System (sView/Tahoe) Door
Access
The sView door is open
58 Latched Door Detector Board The battery is low for the latched (Main, Logic, System, and Cashbox
doors) input circuit.
60 Reset During Bill Change A system reset has occurred during a bill transaction.
65 Mechanical Meter Disconnect The electromechanical meters are disconnected from the machine
(Market Codes 3, 4, 12, 28, and 29).
70 Door Open During Reel Spin Any of the door switches have sensed a door open during a reel spin.
71 Reel #1 Movement The reel moved at an inappropriate time.
72 Reel #2 Movement The reel moved at an inappropriate time.
73 Reel #3 Movement The reel moved at an inappropriate time.
74 Reel #4 Movement The reel moved at an inappropriate time.
75 Reel #5 Movement The reel moved at an inappropriate time.
77 Secondary Device
Communication Fault During
Game/Topbox Wheel Feature
Tilt
Topbox tilt condition has occurred in the Monte Carlo and Lucky
Wheel machines.
80 ROM Checksum Error The checksum of the Main program (U12, U15, U3, U4), or the
Personality (U20, U18) does not match the expected checksum.
81 Battery Low SafeRAM™ battery is below 2.2 VDC.
82 Door Open with Power OFF The machine door was opened while the main power was OFF
(requires JW11 in).
83 SafeRAM™ Error SafeRAM™ failed to retain information during self-test.
83F-0 Invalid SafeRAM™ EPROM Wrong EPROM's used for SafeRAM™ Clear.
83F-1 Invalid Main EPROM Wrong Main EPROM's detected after SafeRAM™ Clear.
83F-2 Invalid Personality EPROM Incompatible Personality EPROM's detected after SafeRAM™ Clear.
83F-3 Invalid Coin Denomination Coin denomination not supported in Market Code.
84 RAM Error Volatile RAM failed to retain information during a self-test.
85 MPU Removed with Power
OFF
The MPU board assembly was disconnected from the backplane
while power was OFF (requires JW15 and JW21 in).
88 Catastrophic Failure The MPU board has failed for an unknown reason (if SafeRAM™ Clear
does not resolve error code, replace MPU board).
89 Cashout to Host Error Cashout to host fails with AFT enabled and cashout to Host set to
Hard. Open and close door to clear error code.
90 Display Error The controller for the LED message center or vacuum fluorescent
display has failed.
91 Communication Error The machine is expecting and not receiving serial communication
from the progressive controller (refer to Troubleshooting,
Communication Errors). The machine will not tilt, and requires a
SafeRAM™ clear to resume operation if the door is opened before
releasing progressive win lockup.
91-0 No Communication No serial traffic found within the last 500 milliseconds.
91-1 Serial Checksum Error Data received by the machine is not the same as sent by the
controller.
91-2 Optioning Error Conflicting machine options (for example 02=04 and 78Lo=0).
91-4 Mystery Progressive Hit
during Game Over
Award data is in the serial stream at an unexpected time. A Handpay
is required for the Mystery Award. urning the Keyswitch displays the
Handpay information. The tilt will clear in five seconds and the
amount awarded is displayed in WIN PAID.
91-5 Jackpot Missing MAPS jackpot information missing from APC communication.
91-7 Game Error Lockout Host status poll timeout detected by game.
91-8 Host Defined Lockout in
Configuration
Game disabled by holiday/non-holiday enable/disable
configuration.
91-9 Game in Host
Configuration
Host is in the process of configuring the game.
91-A Game Not
Configured
Host has not configured the game.
91-B Game in Host Disabled Game disabled by the Host.
91-C Host Disabled for Timeout Game disabled by the Host daily poll timeout shutdown.
91-D Host Disabled Game disabled by Host disable flag in status poll.
91-E Even Log Full More than 1200 events are in the event log.
EP EP HP Awards Available But Not
Acknowledged by Controller
Awards available but not acknowledged by progressive controller.
HDIS Communication Loss No communication with the SAS® Host for five seconds.
99 Severe Failure An error has been detected with the MPU board. A diagnostic self
check has determined that memory is uncorrupted. The error is
recoverable.
91-p SAS® Poll Timeout SAS® host not polling game.
91-d Game in ROM Signature
Calculation
Game receives a ROM signature request from
the host.
91-b Game Locked Out by the Host Game locked out by the host.
Logged

         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #4 on: May 02, 2010, 03:40:34 PM »

Thank you Wayne and reho33 for the information, And listing the codes!! K+   Jim....  applause
Quote
81xx is the error code for a low battery.  You will need to replace the battery then perform a complete saferam clear on the machine.

I put a list of codes below.

Thanks,
Wayne
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #5 on: May 23, 2010, 11:28:47 PM »

Hello all,

I installed a new battery, (Thanks 89chevyman for picking it up) Did the ram clear,

The frenzy game is up and running again!  applause  Thanks for the help!!    Hail

Jim..................
Logged
mleafs_40
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 3



« Reply #6 on: November 01, 2013, 09:07:05 PM »

Hi all,
I have a Ballys pro slot 6000 "Roaring Twenties` slot machine and it has a ``88ff`` error code. Does anyone know what that means
Thanks
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET


« Reply #7 on: November 01, 2013, 09:29:35 PM »

First thing to do is check voltage on battery. It's on MPU. Make sure you turn off before removing.
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #8 on: December 10, 2013, 01:12:15 AM »

Thank you Wayne and reho33 for the information, And listing the codes!! K+   Jim....  applause
Quote
81xx is the error code for a low battery.  You will need to replace the battery then perform a complete saferam clear on the machine.

I put a list of codes below.

Thanks,
Wayne
HELP PLEASE !!!!! Hi guys !!! Looking for a solution for repair a code error 70 (The door was not fully close when the machine was playing) and it just stopt and the jackpot light is open still !
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #9 on: December 10, 2013, 01:12:56 AM »

Thank you Wayne and reho33 for the information, And listing the codes!! K+   Jim....  applause
Quote
81xx is the error code for a low battery.  You will need to replace the battery then perform a complete saferam clear on the machine.

I put a list of codes below.

Thanks,
Wayne
HELP PLEASE !!!!! Hi guys !!! Looking for a solution for repair a code error 70 (The door was not fully close when the machine was playing) and it just stopt and the jackpot light is open still !
BALLY BONUS FRENZY
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #10 on: December 10, 2013, 01:16:39 AM »

Thank you Wayne and reho33 for the information, And listing the codes!! K+   Jim....  applause
Quote
81xx is the error code for a low battery.  You will need to replace the battery then perform a complete saferam clear on the machine.

I put a list of codes below.

Thanks,
Wayne
HELP PLEASE !!!!! Hi guys !!! Looking for a solution for repair a code error 70 (The door was not fully close when the machine was playing) and it just stopt and the jackpot light is open still !

BALLY BONUS FRENZY
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #11 on: December 10, 2013, 01:17:22 AM »


HELP PLEASE !!!!! Hi guys !!! Looking for a solution for repair a code error 70 (The door was not fully close when the machine was playing) and it just stopt and the jackpot light is open still !

Thanks,
Wayne[/quote]
[/quote]
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.


« Reply #12 on: December 10, 2013, 01:19:20 AM »

Just do a ram clear.
Logged

If it ain't broke....Stop trying to fix it.
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #13 on: December 10, 2013, 02:50:46 AM »

Just do a ram clear.

Ok and How does I do that ?
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #14 on: December 10, 2013, 02:52:16 AM »

Just do a ram clear.

Ok and How does I do that ?
Do I have to push a certain button to do thatit is simple to do ? I'm not an expert
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #15 on: December 10, 2013, 02:54:51 AM »

Just do a ram clear.

Ok and How does I do that ?
Do I have to push a certain button to do thatit is simple to do ? I'm not an expert
Do the reset button doing that ?
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #16 on: December 10, 2013, 02:55:26 AM »

Just do a ram clear.

Ok and How does I do that ?
Do I have to push a certain button to do thatit is simple to do ? I'm not an expert
Do the reset button doing that ?
Thanks for the help !
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #17 on: December 10, 2013, 03:13:24 AM »

Just do a ram clear.

Ok and How does I do that ?
Do I have to push a certain button to do thatit is simple to do ? I'm not an expert
Do the reset button doing that ?
I just saw on youtube what it is !!!!! Where can I find the right CLEAR CHIP for my machine BALLY Bonus Frenzy ? IS that a severe or common repair ? DO for sure my machine will work after that ? I'm little  bit stress right ! I just go it 2 days ago oufff Thanks a lot !
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752



« Reply #18 on: December 10, 2013, 03:40:14 AM »

(1) U-28 and (1) U-43 for a 6000 machine.
Check with the vendors on this site.
Logged
Franky153
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10



« Reply #19 on: December 10, 2013, 01:41:02 PM »

Just do a ram clear.

Thanks for the advice ! Do you know if it gonna a work for sure ? I have saw annother message a the bottom that said : If it aight broke .. . stop trying to fix it ? Was it for me and the same error code 70 ? I'm gonna try for sure to do the RAM CLEAR. I'm just scared that my machine will not work anymore Sad
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.113 seconds with 20 queries.