I WANT TO THROUGH THIS MONTE CARLO OUT THE WINDOW!!!!

[staz]

im so aggravated with this damm machine i spent 2 hours tryen to fix this panel from fallen evrytime i open the door..... i cant get this panel to stop popen out evrytime i open the door a few times it almost fell....... i tried a different panel and still pops out..... does anybody have the corect entire bracket assembly for this not to pop out.....

[Brianzz]

Have you tried this?

[staz]

i tied it all where would i tape it to????????

[a69mopar]

Mine don't fall out.  here's a pic of the type.  I'm sure Jim at Blueridge has the complete assembly.

Thanks,
Wayne

[tacman]

If something is not right with the machine, contact the vendor you got it from. If you got it from CL or Ebay then you should get ahold of Blueridge.

 Dan (tacman)

[stayouttadabunker]

Staz,
There's four little nuts behind that bracket....are they tight?
They hold a thin metal plate against the glass.
When tightened properly, the panel should not be loose!

[jdkmunch]

The panel should sit snug in the the track and never feel like it is going to fall!

[a69mopar]

The I View panels don't usually have the center latch assembly either in the machine or on the panel.  If Staz changes it to a regular one like I showed, then he can install the latch and it will not fall out.

Thanks,
Wayne

[staz]

what part of the assembly am i missing? heres what it looks like with out the panel

[jdkmunch]

I think i see your problem -   Look at mine - the faceplate that the glass sits on locks into this assembly.   To remove the glass you have to stick your finger in there from underneath and press the latch to release it.  It looks like your latch is missing. 

[jdkmunch]

The second picture above is the glass with the bracket on it. 

Here's a picture all together.

[staz]

where can i get the corect bracket assembly?

[a69mopar]

Not wanting to sound repetitive. I think you should check with Blueridge.  You already received my answer via email.  Someone else may have it if you post a WTB in the classifieds.
Thanks,
Wayne

[staz]

i bought the machine at betterslots jim should be able to get it for me.....

[jdkmunch]

Ohh you should have said so in the first place!
It's as good as fixed. Just let him know - he stands 100% behind his machines

[Bettor Slots]

The problem your are having is related to the fact that the original gold cover plate and machine was one of the few that came from Wynn.  They use the large LCD touch screens as part of their player tracking.  Of course all of that equipment was stripped out of the machine before it left the casino.  My treatment on all of these cover plates was to use a gold or silver chrome finished film over a plexi-glass panel and then affixed to the back so you got a nice clean look however in this particular case I did not like the large open panel of about 7 1/2" wide and 5" high.  So instead I bought you another standard gold chrome panel with just the card reader and button panel openings because I knew it looked much better and then just rigged the bracket behind so it would hold.  Looked good in the shop but my rigging must of shook loose from transport.  Sorry I could not call you back yesterday, I just had too many things going on at once.  Send back the bracket and panel and I will take care it or you can have the original one from Wynn if you want it but I don't recommend it.  Jim.

[morspeed]

I have that bracket. Just scrapped 2 bally 6000 R/T  Gold Cabinets. I installed one in my Monte as well but I have one left.
Tommy

[Bettor Slots]

I have that bracket. Just scrapped 2 bally 6000 R/T  Gold Cabinets. I installed one in my Monte as well but I have one left.
Tommy

There are a few versions of the bracket out there depending on the player tracking set up.  If you have the type that has the center bottom clip that would be helpful to the original poster and I would like to pick it up from you to help him out.  Please PM information and pricing.  Thanks. Jim.

[morspeed]

Yes it is the center bottom clip. I have one on my monte.
Tommy