Welcome, Guest. Please login or register.
June 18, 2024, 10:29:06 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  Game changes in printer enabled 550
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Game changes in printer enabled 550  (Read 4138 times)
cruisepl
PGFD (Ret.)
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 33
Offline Offline

Gender: Male
Posts: 296



« on: September 16, 2010, 05:19:24 PM »

I have recently purchased some additional WMS 550 chip sets. I have two 550 machines in my Gameroom, one with a printer and one without.
If I try to put printer enabled software into the cabinet without a printer I will get a tilt because the game software is programmed to look for the printer, that I can understand.
Am I correct in thinking that I can put non printer enabled software into the cabinet with the printer without any problems or will the machine still try to enable the printer through some hidden program some place and give me a tilt?   Scratch Head
 
I figured I would ask here first and if nobody knows for sure Ill try it and post the results

Thanks

Jay
Logged

Someone has to be stupid enough to run into a burning building when everyone else is running out !!
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585



« Reply #1 on: September 16, 2010, 09:17:27 PM »

I thought you could use the XU-2 and XU-3 printer based chip in a non-printer 550 machine. You just have to set the hopper payout to 1 and never try to cash out
It's been a long time and can't remember for sure.
Logged
westec1
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 36
Offline Offline

Gender: Male
Posts: 263



« Reply #2 on: September 16, 2010, 10:28:42 PM »


Printer based games have to be used in a machine with a printer, however you can use your hopper based games in both,
just set the hopper payout to 1, if you cash out with only 1 credit on the machine you will cause a fault, as there is no hopper installed,
you will then have to do a ram clear and set the game up again.

Wes
Logged

Wes propeller
cruisepl
PGFD (Ret.)
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 33
Offline Offline

Gender: Male
Posts: 296



« Reply #3 on: September 16, 2010, 10:33:59 PM »


Printer based games have to be used in a machine with a printer, however you can use your hopper based games in both,
just set the hopper payout to 1, if you cash out with only 1 credit on the machine you will cause a fault, as there is no hopper installed,
you will then have to do a ram clear and set the game up again.

Wes


K+ Wes  I was pretty confident this was the case
Logged

Someone has to be stupid enough to run into a burning building when everyone else is running out !!
cruisepl
PGFD (Ret.)
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 33
Offline Offline

Gender: Male
Posts: 296



« Reply #4 on: September 16, 2010, 10:36:43 PM »

I thought you could use the XU-2 and XU-3 printer based chip in a non-printer 550 machine. You just have to set the hopper payout to 1 and never try to cash out
It's been a long time and can't remember for sure.

If you try to play a printer based game in a non printer 550 or in a machine that has a printer error you will most definitely get a tilt message. this I know from experience
Logged

Someone has to be stupid enough to run into a burning building when everyone else is running out !!
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.124 seconds with 19 queries.