Welcome, Guest. Please login or register.
September 28, 2024, 04:13:38 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  S plus reels don't stop and run noisly		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: S plus reels don't stop and run noisly  (Read 12976 times)
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« on: October 31, 2010, 06:17:55 PM »
Hallo, I'm from Itlay.....I have a triple double diamond S Plus.....
The reels runs always  and don't stop.......no candle light, no Credit and winning display, no insert coin light o coin accepted light........I've tried to turn reset key but nothing happen.....
All fuses are good
Help please.....
Thanks Max
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #1 on: October 31, 2010, 07:47:32 PM »
I would re-seat the MPU and connectors going to the mother board.

MPU is the big silver tray at the back of the machine mother board is the board at the bottom.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #2 on: November 03, 2010, 01:27:49 PM »
I, ve pulled out the MPU, inspected for broken or burned elements....the wire to the mother board are OK.....and the motherboard are ok (no burn or broken).....re seated the MPU but the problem is the same....no display, no candle light, and the reel runs slow with noise.......I've turned off and on the machine and now the reel are stopped....but the machine is inoperative.....no light, no display and the reset key don't work......
I think that I need a new motherboard and MPU!!!
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #3 on: November 03, 2010, 01:41:49 PM »
good and bad news, first the good,  we could help you get the machine running,  bad news,  you will need to do a few things to help us help you.  do you have a meter to measure voltages?, does the machine have a bill acceptor?, where is the main logic board located?  Does the denomination lamp lite? as soon as you turn on power to the machine the lamp should come on.(assuming that the bulb is good) If the bulb is good and it does not come on then that means you are not getting 7vac to it.  That usually indicates the connector coming from the lower power supply module to the motherboard is bad. ( usually brown discoloring on the connector itself) wiggle this as you watch the denomination lamp. this will establish that you are getting power to the main logic board.

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #4 on: November 07, 2010, 05:57:45 PM »
Hi Jim......thanks for the answer... Smiley
My slot is a S Plus first type (year 1989), no bill acceptor...only token. The main logic board is located on the vertical left side of the machine (mother board and CPU board). If need I have a meter tester. The denomination lamp lam is working and come on when I turn on the machine......The reels often stops and re start running. Note: the reels run not in correct way but backwards.... (sorry for the english!!)...
max
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #5 on: November 07, 2010, 06:13:55 PM »
Reel tilt, is anything rubbing on the reels. wire harness or front door, light bezel??
Logged
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #6 on: November 08, 2010, 05:22:09 AM »
No..nothing.....the reels runs with door open.....when power off the reels moves free...
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #7 on: November 08, 2010, 12:30:03 PM »
the reels running backwards is normal for a S+. it will do it the first time when power is applied, and it goes through its set-up and self diagnostic tests, then the reels will stop reel #3 then reel #2, then reel #1.  then during normal game play they will stop 1-2-3. 
 can you get into the test mode by pressing the white test button?  does anything change when you close the door and secure the latch all the way down ?


Jim 
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #8 on: November 08, 2010, 01:19:31 PM »
Hi Jim.......
no! I can't go into test mode......nothing happen when I press the test button or turn the reset key........and nothing change when I close the door and secure the latch bar.....the credit/winning display is off......no number..no light...
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: November 08, 2010, 02:06:01 PM »
Just for kicks with the door open, turn the reset key once,
then close the door and tell us what happens.
Logged
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #10 on: November 08, 2010, 02:13:48 PM »
nothing..... Sad
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #11 on: November 08, 2010, 02:25:00 PM »
Do you have a spare MPU to swap with the chips?
We need to single out the problem.
Spare boards for S+'s are not expensive at this time.
Make sure it's the same MHz  (10 or 16 MHz) as the one your using now.

Also, have you checked the 2 wires that run to the reset key-switch?
Can you verify for us with a multimeter that the key switch is operational?
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #12 on: November 08, 2010, 03:13:37 PM »
Max,   one last area to check, since the denomination lamp is on then the 7vac is good, since the reels are locked in (they don't spin freely when power is applied) then the 24vac is good, the last voltage to check is +vb.  This is derived from the 8vac.  you can check the +vb on the door display board. measure across C-6 a 15 microfarad cap.  you should measure 8-10 vdc.

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #13 on: November 08, 2010, 03:50:55 PM »
Here's a photo to help you Max!  yes
Make sure you don't ground out the display board to the door panel ! lol
Click to enlarge...>>>

* Measuring for +Vb across C6 a 15 microfarad cap.jpg (57.46 KB, 1024x768 - viewed 242 times.)
Logged
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #14 on: November 08, 2010, 06:09:25 PM »
the +vb is Ok!! 10.7 V at the display board!!
thanks again
Max
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #15 on: November 08, 2010, 06:32:28 PM »
Max, since all the voltages appear to be good  your first guess could be correct.  I would inspect all the cabinet wiring, make sure all the plugs are seated, no bent pins on the logic board, if all of these look good then I would suspect the board. did you look at all the chips that are in sockets? for proper insertion and for legs bent under neath the chip,  and lastly, look for missing components around the regulator( part with the black heat sink) the big diode in front of it.

even if nothing worked in the machine usually you can get some indication that there is some data coming from the board to the output (display), when you get nothing and all the power supply voltages are good then I would suspect the board.

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #16 on: November 09, 2010, 06:57:54 PM »
Hi
I'm a very luckly boy!!! Sad Sad..............
In italy is impossible to find Motherboard or CPU board for the IGT slot.......
I' will search on Ebay USA!!!!
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #17 on: November 09, 2010, 08:11:46 PM »
Could battery issues cause this problem? Just asking because I'm not overly familiar with the S±
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #18 on: November 09, 2010, 09:07:17 PM »
I do not think so, if battery was low you get a 12 showing on the display.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #19 on: November 09, 2010, 11:50:10 PM »
Quote from: maxvit on November 09, 2010, 06:57:54 PM
Hi
I'm a very luckly boy!!! Sad Sad..............
In italy is impossible to find Motherboard or CPU board for the IGT slot.......
I' will search on Ebay USA!!!!

You might want to post a WTB in our classified section and let the potential vendors know where you're located. (Psst.. I know where you are, but I'll let you tell them. Tongue Out rotflmao rotflmao) One or more of them may be willing to ship to you.


Stat garfield
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #20 on: November 10, 2010, 02:42:39 AM »
Quote from: StatFreak on November 09, 2010, 11:50:10 PM
let the potential vendors know where you're located. (Psst.. I know where you are, but I'll let you tell them.)

I'm going to guess he's in Italy.


Quote from: maxvit on November 09, 2010, 06:57:54 PM
In italy is impossible to find Motherboard or CPU board for the IGT slot.......

Sherlock Smiley
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #21 on: November 10, 2010, 03:42:02 AM »
Quote from: StatFreak on November 09, 2010, 11:50:10 PM
Quote from: maxvit on November 09, 2010, 06:57:54 PM
Hi
I'm a very luckly boy!!! Sad Sad..............
In italy is impossible to find Motherboard or CPU board for the IGT slot.......
I' will search on Ebay USA!!!!

You might want to post a WTB in our classified section and let the potential vendors know where you're located. (Psst.. I know where you are, but I'll let you tell them. Tongue Out rotflmao rotflmao) One or more of them may be willing to ship to you.


Stat garfield



 hyper hyper hyper hyper Ooh Ooh Ooh! I know! He's in Australia!  hyper hyper hyper hyper




 Weird Eyes Weird Eyes
Logged
Thanks,
Bill
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #22 on: November 10, 2010, 05:08:55 AM »
Serves me right for not reading it fully.  Silly Me! 

This is my third screw up today. Spank  If only I could blame it on booze. wine   Weird Eyes     Maybe I should start drinking.  drinking whiskey Cry Laughing Cry Laughing Cry Laughing

SF garfield
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #23 on: November 10, 2010, 05:52:42 AM »
Quote from: StatFreak on November 10, 2010, 05:08:55 AM
Serves me right for not reading it fully.  Silly Me! 

This is my third screw up today. Spank  If only I could blame it on booze. wine   Weird Eyes     Maybe I should start drinking.  drinking whiskey Cry Laughing Cry Laughing Cry Laughing

SF garfield

Hey, it's always 5 o'clock somewhere! drinker chug drinking whiskey cheers Plastered Buddies champagne wine Drinking Wine love whiskey
Logged
Thanks,
Bill
maxvit
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 10
« Reply #24 on: November 10, 2010, 09:24:35 AM »
Cheesy Cheesy Cheesy.....
I've found my IGT Slot in a whareouse of a Casino Suppliers in Slovenia.......in Italy you can't find used IGT slot or other moderns Slots because the only place where you can find Slot are the casino (only 3 in Italy)......and is impossible to find suppliers of used machine Sad
In slovenia there are a lot of casino.....and a lot of suppliers Smiley
But the right thing is that in Italy modern or older slot are legal for a home use!! Smiley
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.137 seconds with 20 queries.