Welcome, Guest. Please login or register.
November 22, 2024, 06:14:53 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  Mikohn Progressive Systems.
| | |-+  Mikohn Progressive Controllers Displays and other info 		0 Members and 7 Guests are viewing this topic. « previous next »
Pages: 1 ... 31 32 33 [34] 35 36 Go Down Print
Author Topic: Mikohn Progressive Controllers Displays and other info  (Read 395176 times)
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #825 on: September 18, 2008, 02:54:44 AM »
HeXa
Guest


   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1088 on: October 29, 2007, 03:35:32 PM »   

--------------------------------------------------------------------------------
Wasn't sure if Mikohn/Aristocrat are touchy about this sort of thing.... if they aren't, I'll see what I can find out   
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #826 on: September 18, 2008, 02:55:03 AM »
Jay
Coin-Op Links, Info and Web Sites Moderator.
Sr.Tech NLG Member 1000+ Post


Members Rating: 396
[Good Karma] [Bad Karma]
 Online

Posts: 4182


If you cant afford to lose, you cant afford to win


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1089 on: October 29, 2007, 07:28:21 PM »   

--------------------------------------------------------------------------------
Well Mikohn was sold off to Progressive Gaming about 3 years ago now. They focus more on RFID bet management systems now than progressives. They have a division that still make many of the large signs but for the most part the industry has moved towards plasma displays. The progressives are now inherient to the gaming platforms themsevles as opposed to an addon. 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #827 on: September 18, 2008, 02:55:37 AM »
brichter
Contributing Gold NLG Member.
Sr.NLG Member 501 to 1000 Post


Members Rating: 219
[Good Karma] [Bad Karma]
 Online

Posts: 936


No longer looking for a WHITE!!11one1! slot stand.


 

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1090 on: October 29, 2007, 07:59:40 PM »   

--------------------------------------------------------------------------------
Can anyone tell me what manual covers the "linker" I posted pics of a couple pages back? Specifically, the connection between it and the CON1 would be nice. i've been through the CON1 manual, but there's no info there AFAIK.
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #828 on: September 18, 2008, 02:56:39 AM »
brichter
Contributing Gold NLG Member.
Sr.NLG Member 501 to 1000 Post


Members Rating: 219
[Good Karma] [Bad Karma]
 Online

Posts: 936


No longer looking for a WHITE!!11one1! slot stand.


 

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1093 on: October 31, 2007, 09:41:56 PM »   

--------------------------------------------------------------------------------
Quote from: Jay on October 29, 2007, 08:10:05 PM
its about page 10 of the Con1 hardware manual.

Check your email.

Found it, page 17 and 18. The problem was made worse by the harness for my CON1 having the pins for the controller-linker connection reversed on one end, that's why I couldn't get the comms up. Quick session with my connector tool and it's all good now! GK for you, good sir!. 

Even mess.do works in attract mode! Need to fab a longer cable from the linker to the display itself, only about 18" there right now.
 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #829 on: September 18, 2008, 02:56:59 AM »
Jay
Coin-Op Links, Info and Web Sites Moderator.
Sr.Tech NLG Member 1000+ Post


Members Rating: 396
[Good Karma] [Bad Karma]
 Online

Posts: 4182


If you cant afford to lose, you cant afford to win


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1094 on: October 31, 2007, 09:48:06 PM »   

--------------------------------------------------------------------------------
I had 60ft between the CON1 and one of my signs. No problems.
I also had to make a 6ft ribbon cable between the Cham44 and the sign.
I had put the controller in a closet and ran the ribbon cable to the sign which was a header around my bar.
I had expected problems, a few people advised me on chokes that might help.
Again no problems.
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #830 on: September 18, 2008, 02:57:17 AM »
brichter
Contributing Gold NLG Member.
Sr.NLG Member 501 to 1000 Post


Members Rating: 219
[Good Karma] [Bad Karma]
 Online

Posts: 936


No longer looking for a WHITE!!11one1! slot stand.


 

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1095 on: October 31, 2007, 10:38:01 PM »   

--------------------------------------------------------------------------------
ARGH!!!   

Everything works except odometer. Tried changing the odometer controls, tried changing flip rate, still increments immediately. Seems to be no way to change font on this, so it can't be that setting.

even had it scrolling <SADM from right to left, must be some arcane error I've never seen before.

About ready to call it a night. 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #831 on: September 18, 2008, 02:57:36 AM »
Jay
Coin-Op Links, Info and Web Sites Moderator.
Sr.Tech NLG Member 1000+ Post


Members Rating: 396
[Good Karma] [Bad Karma]
 Online

Posts: 4182


If you cant afford to lose, you cant afford to win


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1096 on: November 01, 2007, 12:47:33 PM »   

--------------------------------------------------------------------------------
Can't do Odometer in Travel mode. Need to do it in block mode.
Painting works the same way. Doesn't work in travel mode.

Also read the section on Fast and Slow. Normally the Odometer runs slow but when it gets xx coins behind it then jumps by larger increments in an attempt to catch up.....

So heres the trick.... push the fast value way up high so its always slow..... this is cool so when you stop playing you still see the odometer continue to increment.

Next Do some Travel Messages - "Visit our Excellent all day Buffet on the second level" Or some block mode messages like "Play Play Play" .... "MEGABUCKS" .... repeat in three colors so it appears to flash...."pot of Gold" fits nicely on a 1x2 as well......

Basically put up anything but the jackpot amount.

What you are doing is creating a backlog of play....and the odometer effects works from the last displayed value. So if you included the JP value in earlier messages your odometer effect only occurs from the last displayed value....and if you displayed current value...then your odometer is only going to show you the coins currently going into the machines....

Next do the jackpot token with the odometer effect..... you will want to do a slow speed command before this as well otherwise it won't hang around long enough to show the Odometer effect....

hope this helps....
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #832 on: September 18, 2008, 02:58:01 AM »
brichter
Contributing Gold NLG Member.
Sr.NLG Member 501 to 1000 Post


Members Rating: 219
[Good Karma] [Bad Karma]
 Online

Posts: 936


No longer looking for a WHITE!!11one1! slot stand.


 

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1097 on: November 01, 2007, 05:17:02 PM »   

--------------------------------------------------------------------------------
Quote from: Jay on November 01, 2007, 12:47:33 PM
Can't do Odometer in Travel mode. Need to do it in block mode.
Painting works the same way. Doesn't work in travel mode.

Also read the section on Fast and Slow. Normally the Odometer runs slow but when it gets xx coins behind it then jumps by larger increments in an attempt to catch up.....

So heres the trick.... push the fast value way up high so its always slow..... this is cool so when you stop playing you still see the odometer continue to increment.

Next Do some Travel Messages - "Visit our Excellent all day Buffet on the second level" Or some block mode messages like "Play Play Play" .... "MEGABUCKS" .... repeat in three colors so it appears to flash...."pot of Gold" fits nicely on a 1x2 as well......

Basically put up anything but the jackpot amount.

What you are doing is creating a backlog of play....and the odometer effects works from the last displayed value. So if you included the JP value in earlier messages your odometer effect only occurs from the last displayed value....and if you displayed current value...then your odometer is only going to show you the coins currently going into the machines....

Next do the jackpot token with the odometer effect..... you will want to do a slow speed command before this as well otherwise it won't hang around long enough to show the Odometer effect....

hope this helps....

I'll double check, but I'm pretty sure I'm not using travel mode for the JP display.

This is on my CON1/CHAMI not the Supreme, btw...
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #833 on: September 18, 2008, 03:03:06 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1099 on: November 03, 2007, 08:01:59 AM »   

--------------------------------------------------------------------------------
Thank you!! I suucessed.
My version of CON2 is 4.01.
I think we need the CHAMII+s have CSSA1.3.
If the version is CSSA1.3,we can use CHAMII+ has STA/ver1.61 and ver2.07.....
If the version is CSSA1.2,we can't use CHAMII+ has STA/2.05.STA/ver1.41......
The cable needs the connection only pin4 and pin5.
Thanks!!

 

* P1010004.JPG (70.14 KB, 640x480 - viewed 494 times.)

* P1010007.JPG (74.96 KB, 640x480 - viewed 460 times.)

* P1010008.JPG (73 KB, 640x480 - viewed 497 times.)
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #834 on: September 18, 2008, 03:03:33 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1100 on: November 03, 2007, 07:17:11 PM »   

--------------------------------------------------------------------------------
But I have 1 Question.
The display don't show MESS.DO.
2 munite after coin in,CON2 must show atract message.......
I checked Jackpot Summary F3.It shows MESG and programed MESS.DO.
Please teach how to display MESS.DO.

Now I don't connect CON2 to S+ slots.
Can't CHAMII+ show MESS.DO without connection to machine?

Thank you!
 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #835 on: September 18, 2008, 03:03:56 AM »
Jay
Coin-Op Links, Info and Web Sites Moderator.
Sr.Tech NLG Member 1000+ Post


Members Rating: 396
[Good Karma] [Bad Karma]
 Online

Posts: 4182


If you cant afford to lose, you cant afford to win


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1101 on: November 04, 2007, 11:18:11 AM »   

--------------------------------------------------------------------------------
I belive you need a CON1 or CON2 controller for the Mess.do (time out message).
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #836 on: September 18, 2008, 03:04:43 AM »
Jay
Coin-Op Links, Info and Web Sites Moderator.
Sr.Tech NLG Member 1000+ Post


Members Rating: 396
[Good Karma] [Bad Karma]
 Online

Posts: 4182


If you cant afford to lose, you cant afford to win


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1103 on: November 04, 2007, 02:19:58 PM »   

--------------------------------------------------------------------------------
Assuming you are using the CON2 to drive the CHAMII .... (as this will not work with a ChamII+ running standalone).

To get the message time out then within PSP
You go to Screen 2 - Jackpot Summary.
F3 is probably set to ------

Press F3 until you get it to change to MESG
Don't forget to hit F1 to SEND before you leave this screen
F10 to exit.

Post back and let us know how this worked out.
 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #837 on: September 18, 2008, 03:05:01 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1104 on: November 05, 2007, 05:18:52 AM »   

--------------------------------------------------------------------------------
I try on both version PSP 2.00 and 2.03.But can't sucsess.
If I press F1 in "4.Message Programing" ,First,"Default Error check controller #1" was shown and second "Sending file XXXX.DO."was shown.
My CON2 was missing U4 chip.....
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #838 on: September 18, 2008, 03:05:20 AM »
Jay
Coin-Op Links, Info and Web Sites Moderator.
Sr.Tech NLG Member 1000+ Post


Members Rating: 396
[Good Karma] [Bad Karma]
 Online

Posts: 4182


If you cant afford to lose, you cant afford to win


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1105 on: November 05, 2007, 08:06:37 AM »   

--------------------------------------------------------------------------------
Do you get your standard Jackpot Message displayed ? or just the values ?
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #839 on: September 18, 2008, 03:05:42 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1106 on: November 05, 2007, 02:14:02 PM »   

--------------------------------------------------------------------------------
I can display $800.00 etc....But I don't know how to display Message(letters).
Could you let me knoe how to display JPOT.DO or JACK1.DO?
Thank you!!
 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #840 on: September 18, 2008, 03:06:01 AM »
Jay
Coin-Op Links, Info and Web Sites Moderator.
Sr.Tech NLG Member 1000+ Post


Members Rating: 396
[Good Karma] [Bad Karma]
 Online

Posts: 4182


If you cant afford to lose, you cant afford to win


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1107 on: November 05, 2007, 02:33:27 PM »   

--------------------------------------------------------------------------------
The display Scrolls through all of the files JPOT.DO, then JPOT1.DO, JPOT2.DO etc..... then repeats.

If MESS.DO is enabled this is a different message that displays after a min or so of non activity.
Worry about getting the standard messages working first.

The message you reported....
"Default Error check controller #1"

Typically means that the CON2 is NOT communicating with the CHAMII.
I wouldn't be surprized to find that the ChamII+ is still in standalone mode as opposed LINK mode and the $800 is not coming from the CON2

Can you use the CON2 to change the value from 800 to say 900 to prove that the interface is working.


 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #841 on: September 18, 2008, 03:06:23 AM »
idesign
Site Administrator
Sr.Tech NLG Member 1000+ Post


Members Rating: 581
[Good Karma] [Bad Karma]
 Offline

Posts: 2520



 

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1108 on: November 05, 2007, 02:52:58 PM »   

--------------------------------------------------------------------------------
I have a related question.Ê ÊYou start out with $800 so if you play the machine will the amount increment or not?Ê If you have a Supreme connected to the CON2 also, is it showing $800?Ê You are using PSP connected to the CON2 and not the CHAMII+?

And one other thing, pins 1 and 5 are jumpered on your serial cable?
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #842 on: September 18, 2008, 03:06:46 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1109 on: November 06, 2007, 01:53:21 PM »   

--------------------------------------------------------------------------------
Thank you for quick response.
>The display Scrolls through all of the files JPOT.DO, then JPOT1.DO, JPOT2.DO etc..... then repeats.
Can I display JPOT.DO files as demonstreation without JACK POT?
I check all files,JPOT1.DO,JPOT2.DO........

>The message you reported....
>"Default Error check controller #1"
This message was shown in only messeage programming page.
In Jackpot programming page,it wasn't shown.

>Typically means that the CON2 is NOT communicating with the CHAMII.
>I wouldn't be surprized to find that the ChamII+ is still in standalone mode as opposed LINK mode and the $800 is not coming from the CON2
In Jackpot programming page,if I chage amount of current value,the Display of CHAMII+ is chaged value too.
I think the CON2 comunicated to CHAMII+.

>Can you use the CON2 to change the value from 800 to say 900 to prove that the interface is working.
Yes,I can chage value of CHAMII+ display,900 or 999.......

Sorry my poor English.....




Quote
 
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #843 on: September 18, 2008, 03:07:08 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1110 on: November 06, 2007, 02:02:41 PM »   

--------------------------------------------------------------------------------
Thank you!!
I have not connected machines yet.
My machines are another place.
I will connect soon.
I connect PC to CON2 with RS232C.
Please check my pictures.....

>And one other thing, pins 1 and 5 are jumpered on your serial cable?
I use straight serial cable.
If I load.all data come from CON2 to PC.And I can send data in Jackpot programming page.....
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #844 on: September 18, 2008, 03:07:30 AM »
brichter
Contributing Gold NLG Member.
Sr.NLG Member 501 to 1000 Post


Members Rating: 219
[Good Karma] [Bad Karma]
 Online

Posts: 936


No longer looking for a WHITE!!11one1! slot stand.


 

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1111 on: November 06, 2007, 02:42:01 PM »   

--------------------------------------------------------------------------------
Quote from: vf192 on November 03, 2007, 07:17:11 PM
But I have 1 Question.
The display don't show MESS.DO.
2 munite after coin in,CON2 must show atract message.......
I checked Jackpot Summary F3.It shows MESG and programed MESS.DO.
Please teach how to display MESS.DO.

Now I don't connect CON2 to S+ slots.
Can't CHAMII+ show MESS.DO without connection to machine?
 
Thank you!


FWIW, I've not been successful yet in getting mess.do to display on either my Supreme or my CHAMII+ from the CON2, but it does work on my CHAMI/CON1 combination. I haven't tried all of the settings in this thread, however, no time yet.   
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #845 on: September 18, 2008, 03:07:56 AM »
idesign
Site Administrator
Sr.Tech NLG Member 1000+ Post


Members Rating: 581
[Good Karma] [Bad Karma]
 Offline

Posts: 2520



 

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1112 on: November 06, 2007, 02:52:35 PM »   

--------------------------------------------------------------------------------
Quote from: vf192 on November 06, 2007, 02:02:41 PM


>And one other thing, pins 1 and 5 are jumpered on your serial cable?
I use straight serial cable.
If I load.all data come from CON2 to PC.And I can send data in Jackpot programming page.....

If you are using a straight serial cable without pins 1 and 5 jumpered to one another that is the reason you are getting that error message.
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #846 on: September 18, 2008, 03:08:17 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1113 on: November 07, 2007, 06:09:00 AM »   

--------------------------------------------------------------------------------
Yes,I used straight serial cable.Sorry.
I can program message to CON1.So I don't know it.
I made cable jumperd pin1 and pin5.
But default error message was shown....
Thanks....
I will try again.
Logged
My CAT is smarter than your honor student  !!!
Thor777
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 415
Offline Offline

Gender: Male
Posts: 1419


Slave to my CAT's !!!
« Reply #847 on: September 18, 2008, 03:08:54 AM »
vf192
New NLG Member 1 to 100 Post


Members Rating: 2
[Good Karma] [Bad Karma]
 Offline

Posts: 24


?-?-?-?


   

   Re: Mikohn Progressive Controllers Displays and other info
« Reply #1114 on: November 09, 2007, 06:52:15 PM »   

--------------------------------------------------------------------------------
I made pin1 and pin5 jumpered serial cable again.
I can program Jackpot Value without Error.
But in message programming page,when I push F1 key(SEND),Default Error check controller #1 massage is displayed.
My CON2 may have some errors.......
Thank you your spending important time.
THANK YOU!!
Logged
My CAT is smarter than your honor student  !!!
westec1
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 36
Offline Offline

Gender: Male
Posts: 263
« Reply #848 on: October 15, 2008, 02:00:23 AM »
Hi All

I have been reading through the Mikohn Post's and have seen reference to a "Con1 hardware manual". Scratch Head

I'm getting a con1 with no wiring or power supply, and would like to know if this manual is still available. arrow

Thanks
Wes
Logged
Wes propeller
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #849 on: October 16, 2008, 02:19:19 AM »
I can neither confirm or deny that you might have email realating to this...
Logged
The only way to beat the casino is to own it
Pages: 1 ... 31 32 33 [34] 35 36 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.086 seconds with 20 queries.